Published online by Cambridge University Press: 01 February 2011
We report on the development of an efficient n-type skutterudite based on the double-filled structure of CoSb3. The chosen filler species Ba and Yb have a large phonon contrast and this combination is very effective in lowering the lattice thermal conductivity. The highest figure of merit in excess of 1.3 is obtained near 800K and the figure of merit greater than unity persists down to temperatures of about 550K. The compounds are synthesized with high purity Co (99.998%) and Sb (99.9999%). In order to reduce the cost of the materials, we have also prepared filled skutterudites of similar composition but using less pure Co (99.8%) and Sb (99.999%). The figure of merit of these lower purity compounds reaches ZT = 1 at 800K with the materials' cost dramatically reduced.
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.