Hostname: page-component-745bb68f8f-s22k5 Total loading time: 0 Render date: 2025-02-04T16:36:01.290Z Has data issue: false hasContentIssue false
  • English
  • Français

Directional Solidification of Mo5Si3-MoSi2 Eutectic

Published online by Cambridge University Press:  10 February 2011

S. M. Borowicz ,
L. Heatherly ,
R. H. Zee  and
E. P. George
S. M. Borowicz
Affiliation:
Materials Engineering Program, Auburn University, Auburn, AL 36849
L. Heatherly
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
R. H. Zee
Affiliation:
Materials Engineering Program, Auburn University, Auburn, AL 36849
E. P. George
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
Get access

Abstract

The Mo-Si phase diagram exhibits a Mo5Si3-MoSi2 eutectic at the 54% Si composition. Since the terminal phases have comparable melting points and are equidistant from the eutectic composition, there is the possibility of obtaining lamellar microstructures in this system. In addition, if the alloys are directionally solidified, there is the further possibility of obtaining aligned lamellae. In this study, a high temperature (xenon-arc-lamp) optical floating zone furnace is utilized to directionally solidify Mo-Si alloys of the eutectic composition. Growth conditions are systematically varied to investigate their effects on the solidification microstructure. Growth rates and rotation speeds are identified that result in lamellar microstructures.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 552: Symposium KK – High-Temperature Ordered Intermetallic Alloys VIII , 1998 , KK5.28.1
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Massalski, T.B., Binary Alloy Phase Diagrams, American Society For Metals, 1986.Google Scholar
2. Anton, D.L., Shah, D.M., Duhl, D.N., and Giamei, A.F., “Selecting High-Temperature Structural Intermetallic Compounds:The Engineering Approach,” J.Metals, Sept. (1989), 12–17.CrossRefGoogle Scholar
3. Petrovich, J.J., “MoSi2 based High-Temperature Structural Silicides,” MRS Bulletin, July (1993), 35–40.CrossRefGoogle Scholar
4. Pearson, W.B., The Crystal Chemistry and Physics of Metals and Alloys, Pergamon, Oxford, 1967.Google Scholar
5. Kurz, W. and Fisher, D.J., Fundamentals of Solidification, Trans Tech Publ. (1989) 95.Google Scholar
6. Elliott, R., Eutectic Solidification Processing, Buttersworth Publ., 1983.Google Scholar
7. Ito, K., Yano, T., Nakamoto, T., Inui, H. and Yamaguchi, M., Intermetallics 4, S119 (1996).CrossRefGoogle Scholar
8. Mason, D.P, Van Aken, D.C. and Mansfield, J.R, Acta metall. mater., Vol.43 No.3, (1995) 1189.CrossRefGoogle Scholar
9. Mason, D.P and Van Aken, D.C., Acta metall. mater., Vol.43, No. 3, (1995) 1201.CrossRefGoogle Scholar
10. Maloy, S.A., Xiao, S.Q. and Heuer, A.H., J. Mater. Res., 8 (1993) 1079.CrossRefGoogle Scholar