Hostname: page-component-745bb68f8f-b95js Total loading time: 0 Render date: 2025-02-10T07:44:42.165Z Has data issue: false hasContentIssue false
  • English
  • Français

The Design of a Monitoring Program for Iron Alloys on Underwater Historic Shipwrecks in Fathom Five National Marine Park, Ontario, Canada

Published online by Cambridge University Press:  26 February 2011

John Stewart ,
Lome D. Murdock  and
Nancy Binnie
John Stewart
Affiliation:
Parks Canada, Canadian Heritage, 1800 Walkley Rd., Ottawa, Ont. Canada K1A 0M5, john_stewart@pch.gc.ca
Lome D. Murdock
Affiliation:
Parks Canada, Canadian Heritage, 1800 Walkley Rd., Ottawa, Ont. Canada K1A 0M5, john_stewart@pch.gc.ca
Nancy Binnie
Affiliation:
Canadian Conservation Institute, Canadian Heritage, 1060 Innes Rd., Ottawa, Ont. Canada, K1A 0M5, nancy_binnie@pch.gc.ca
Get access

Abstract

In order to design a scheme to monitor the state of preservation of iron alloys that are found on historic shipwrecks sunk in fresh water, it was first necessary to identify the predominant form of corrosion found on the wrecks. This was done by visual observation, in situ surface pH measurements, and X-ray powder diffraction of the corrosion layers. Once the form of corrosion was identified as pitting corrosion, a monitoring scheme based on photographic recording of the rust-red tubercles was designed. This scheme is simple and nondestructive, both necessary characteristics for the monitoring of submerged historic resources.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 462: Symposium DD – Materials Issues in Art and Archaeology V , 1996 , 359
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Murdock, Lome D. and Stewart, John in A Monitoring Program for Shipwrecks at Fathom Five National Marine Park, Canada, edited by Vandiver, P.B., Druzik, J.R., Galvan Madrid, J.L., Freestone, I.C. and Wheeler, G. S., (Mater. Res. Soc. Proc. 352, Pittsburgh, PA, 1995) pp. 867–883.Google Scholar
2. Kohl, Cris, Dive Ontario!, (Published by Kohl, Cris, 16 Stanley Avenue, Chatham, Ontario Canada N7M 3J2, 1990)Google Scholar
3. MacLeod, I.D., Journal of Electroanalytical Chemistry, 118: 291–303 (1981)Google Scholar
4. Fontana, Mars G. and Greene, Norbert D., Corrosion Engineering, 2nd ed. (McGraw-Hill Book Company, 1978), p. 28.Google Scholar
5. Munger, Charles G., Corrosion Prevention by Protective Coatings, (National Association of Corrosion Engineers, Houston, U.S.A., 1984), p. 36.Google Scholar
6. Fontana, Mars G. and Greene, Norbert D., op. cit., p. 53.Google Scholar
7. Munger, Charles G., op. cit., p. 22.Google Scholar
8. Fontana, Mars G. and Greene, Norbert D., op. cit., p. 51.Google Scholar
9. Munger, Charles G., op. cit., p. 23.Google Scholar
10. Speller, F.N., Corrosion - causes and prevention, (McGraw-Hill Inc., New York, 1951)Google Scholar
11. Bosich, Joseph F., Corrosion Prevention/or Practising Engineers, (Barnes and Noble, New York, 1970), pp. 40–42.Google Scholar
12. Singley, K., The Conservation of Archaeological Artifacts from Freshwater Environments, (Lake Michigan Maritime Museum, South Haven, Michigan, 1988)Google Scholar
13. Misawa, T., Corrosion Science, 13, 659–676 (1973)Google Scholar
14. Uhlig, H.H., Corrosion and Corrosion Control, (John Wiley & Sons Inc., New York, 1967), p. 104.Google Scholar
15. Ouahman, Rabia, Report No. 216, Mémoires de la série “Formation a et par la recherche”, Méthodes physiques en archéologie et muséographie, Université de Bordeaux, France, 1991.Google Scholar
16. Corbel, M.-C. and Argyropoulos, V., CCI Analytical Report ARS 3462, 1995, Available from Dept. of Canadian Heritage Kl A 0M5, Ottawa Canada.Google Scholar
17. Pourbaix, Marcel, Lectures on Electrochemical Corrosion, (Plenum Press, New York, 1973), pp. 140–141.Google Scholar
18. Munger, Charles G., op. cit., p. 43.Google Scholar
19. Ives, M.B., Materials Characterization (Elsevier Science Publishing Co., New York, 1992), pp. 257–270.Google Scholar
20. Sheir, L.L.,, Jarman, R.A., Burstein, G.T. editors, Corrosion, Vol. 2, 3rd ed., (Butterworth Heinemann, Oxford, 1994) pp. 19:12–19:15.Google Scholar
21. “Standard Recommended Practice for EXAMINATION AND EVALUATION OF PITTING CORROSION”, Designation D 46 – 76 (Reapproved 1980), American Society for Testing and Materials, Philadelphia, PA.Google Scholar