Hostname: page-component-745bb68f8f-g4j75 Total loading time: 0 Render date: 2025-02-10T08:06:43.293Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Softmagnetic Thin Layers using Barkhausen Noise Microscopy

Published online by Cambridge University Press:  21 March 2011

Jochen Hoffmann ,
Norbert Meyendorf  and
Iris Altpeter
Jochen Hoffmann
Affiliation:
Center for Materials Diagnostics, University of Dayton, Dayton, OH 45469-0121, U.S.A.
Norbert Meyendorf
Affiliation:
Center for Materials Diagnostics, University of Dayton, Dayton, OH 45469-0121, U.S.A.
Iris Altpeter
Affiliation:
Fraunhofer Institute for nondestructive Testing IZFP, Saarbruecken, Germany
Get access

Abstract

Ferromagnetic materials are essential for data recording devices. For inductive or magnetoresistive (MR) sensors softmagnetic thin layer systems are used. Optimal performance of these layers requires homogeneous magnetic properties, especially a pronounced uniaxial magnetic anisotropy. Furthermore, microstructural imperfections and residual stresses influence the magnetic structure in the layer system.

Barkhausen Noise Microscopy enables the characterization of such thin layers. By cycling the magnetic hysteresis of ferromagnetic material electrical voltages (the Barkhausen noise) are induced in an inductive sensor. Miniaturization of the sensor and the scanning probe technique provides resolution down to few micrometers. Two materials were examined in terms of their structure, thickness, residual stresses and heat treatment condition: Sendust, used in inductive sensors and nanocrystalline NiFe, used in MR-sensors. In quality correlations to Barkhausen noise parameters were found. For representative sample a quantification of residual stress distribution could be established employing X-ray stress analysis.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 674: Symposia T/U/V – Applications of Ferromagnetic and Optical Materials, Storage and Magnetoelectronics , 2001 , U1.5
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Theiner, W., Altpeter, I., “Stress Analysis using magnetic Effects”, Handbook for Stress Measurement (VDI-Verlag, Düsseldorf, Germany, 1989).Google Scholar
2. Altpeter, I., Theiner, W., Gessner, M., European Patent EPO 595 117B1, (4 April 1994).Google Scholar
3. Hoffmann, J., “Characterization of ferromagnetic Thin Films using electromagnetic Techniques”, MS. Thesis, University of Saarland, Germany (1998).Google Scholar
4. Ashida, A. and Hattori, M., “Structure and magnetic Properties of Sendust/Under-Layer Films”, IEEE Trans. Magn. 5, 445–450 (1990).Google Scholar
5. Hoffmann, J., Altpeter, I., Kopp, M., Grimm, H., Nichtl-Pecher, W., “Characterization of thin Ferromagnets using Barkhausen Noise Microscopy“, Practical Metallography 37, 261–270, (2000).Google Scholar
6. Altpeter, I., Bender, J., Hoffmann, J., Kopp, M., Rouget, D., Final Report of the Fraunhofer-Institute for nondestructive Testing IZFP to project 03N80003B7 initiated by the German Federal Department for Science and Technology (Saarbrücken, Germany, 1998).Google Scholar
7. Altpeter, I., Hoffmann, J., Nichtl-Pecher, W., “Detection of Residual Stresses and Nodular Growth in Ferromagnetic Layers with Barkhausen and Acoustic Microscopy“, Proceedings of 8th International Symposium on Nondestructive Characterization of Materials (Boulder, CO, 1997).Google Scholar