Hostname: page-component-cb9f654ff-hqlzj Total loading time: 0 Render date: 2025-08-23T06:08:46.301Z Has data issue: false hasContentIssue false
  • English
  • Français

Atomistic Simulation of Dislocation Motion as Determined by Core Structure

Published online by Cambridge University Press:  15 February 2011

Kevin Ternes ,
Diana Farkas  and
Zhao-Yang Xie
Kevin Ternes
Affiliation:
Department of Materials Science and Engineering Virginia Polytechnic Institute and State University, Blacksburg VA 24061
Diana Farkas
Affiliation:
Department of Materials Science and Engineering Virginia Polytechnic Institute and State University, Blacksburg VA 24061
Zhao-Yang Xie
Affiliation:
Department of Materials Science and Engineering Virginia Polytechnic Institute and State University, Blacksburg VA 24061
Get access

Abstract

Two different interatomic potentials of the embedded atom type were used to study the relationships between dislocation core structure and mobility. Core structures were computed for a variety of dislocations in B2 NiAl. Several non-planar cores were studied as they reacted to applied stress and moved. The results show that in some cases, the dislocation core transforms to a planar structure before the dislocation glides, whereas in some other cases the core retains the non-planar structure at stresses sufficient to sustain glide. The effects of stoichiometry deviations on the core structure and motion were also studied.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 350: Symposium U – Intermetallic Matrix Composites III , 1994 , 293
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Vítek, V., Philisophical Magazine 58, 193 (1988).Google Scholar
2. Cahn, R. W., The Materials Research Society Bulletin, 18 (1991).Google Scholar
3. Pasianot, R., Farkas, D., and Savino, E., J. Phys. III 1, 997 (1991).Google Scholar
4. Xie, Z.-Y., Vailhe, C., and Farkas, D., Materials Science and Engineering A 170, 59 (1993).Google Scholar
5. Farkas, D. and Rodriguez, P., Scripta Metallurgica et Materialia 30, 921 (1994).Google Scholar
6. Vítek, V., Perrin, R. C., and Bowen, D. K., Phil. Mag 21, 1049 (1970).Google Scholar
7. Farkas, D. and Savino, E., Scripta Metallurgica et Materialia 22, 557 (1988).Google Scholar
8. Yamaguchi, M., Paidar, V., Pope, D., and Vítek, V., Philisophical MagazineGoogle Scholar
9. Voter, A. F. and Chen, S. P., MRS Symposia Proceedings 82, 175 (1987).Google Scholar
10. Rao, S., Woodward, C., and Parthasarathy, T. A., Material Research Soc. Symposia Proceedings. 213, 125 (1991).Google Scholar
11. Parthasarathy, T. A., Rao, S. I., and Dimiduk, D., Phil. Mag. A 67, 643 (1993).Google Scholar