Hostname: page-component-745bb68f8f-5r2nc Total loading time: 0 Render date: 2025-02-04T16:02:33.214Z Has data issue: false hasContentIssue false
  • English
  • Français

Application of Gel Technology in Preparation of High-Tc Perovskite Superconductors

Published online by Cambridge University Press:  28 February 2011

R. S. Liu ,
G. C. Lin ,
H. M. Sung ,
Y. C. Chen  and
O. C. C. Lin
R. S. Liu
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, 195 Chung-hsing Rd., Sec. 4, Chutung, Hsinchu 31015, Taiwan, Republic of China.
G. C. Lin
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, 195 Chung-hsing Rd., Sec. 4, Chutung, Hsinchu 31015, Taiwan, Republic of China.
H. M. Sung
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, 195 Chung-hsing Rd., Sec. 4, Chutung, Hsinchu 31015, Taiwan, Republic of China.
Y. C. Chen
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, 195 Chung-hsing Rd., Sec. 4, Chutung, Hsinchu 31015, Taiwan, Republic of China.
O. C. C. Lin
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, 195 Chung-hsing Rd., Sec. 4, Chutung, Hsinchu 31015, Taiwan, Republic of China.
Get access

Abstract

La-Ba-Cu-O and Y-Ba-Cu-O superconducting systems have been successfully prepared by gel techniques with high degree of chemical homogeneity. The precursor gel was synthesized from mixture of the corresponding metallic nitrates and di-carboxylic acids. The sintered oxides prepared from the different dicarboxylic acids were all Tc = 90K perovskite superconductors. However differences in electrical and magnetic properties were also observed. Effects due to the different acids elucidated by magnetic susceptibility measurements and X-ray diffraction analysis will be discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 99: Symposium AA – High-Temperature Superconductors , 1987 , 253
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Bednorz, J.G. and Müller, K.A., Z. Phys. B., 64 (1986) 189.Google Scholar
[2] Wu, M.K., Ashburn, J.R., Torng, C.J., Hor, P.H., Meng, R.L., Gao, L., Huang, Z.J., Wang, Y.Q. and Chu, C.W., Phys. Rev. Lett., 58 (1987) 908.Google Scholar
[3] Hor, P.H., Gao, L., Meng, R.L., Huang, Z.J., Wang, Y.Q., Forster, K., Vassilious, K., Chu, C.W., Wu, M.K., Ashburn, J.R. and Torng, C.J., Phys. Rev. Lett., 58 (1987) 911.Google Scholar
[4] Wang, H.H., Carlson, K.D., Geiser, U., Thorn, R.J., Kao, H.C.I., Beno, M.A., Monaghan, M.R., Allen, T.J., Proksch, R.B., Stupka, D.L., Williams, J.M., Flandermeyer, B.K. and Poeppel, R.B., Inorg. Chem., 26 (1987) 1474.Google Scholar