Hostname: page-component-7f64f4797f-kjzhn Total loading time: 0 Render date: 2025-11-04T06:43:52.665Z Has data issue: false hasContentIssue false
  • English
  • Français

Applications of Fiber Bragg Grating Sensors in the Composite Industry

Published online by Cambridge University Press:  31 January 2011

Pierre Ferdinand ,
Sylvain Magne ,
Véronique Dewynter-Marty ,
Stéphane Rougeault  and
Laurent Maurin
Get access

Abstract

Optical-fiber sensors based on fiber Bragg gratings (FBGs) provide accurate, nonintrusive, and reliable remote measurements of temperature, strain, and pressure, and they are immune to electromagnetic interference. FBGs are extensively used in telecommunications, and their manufacture is now cost-effective. As sensors, FBGs find many industrial applications in composite structures used in the civil engineering, aeronautics, train transportation, space, and naval sectors. Tiny FBG sensors embedded in a composite material can provide in situ information about polymer curing (strain, temperature, refractive index) in an elegant and nonintrusive way. Great improvements in composite manufacturing processes such as resin transfer molding (RTM) and resin film infusion (RFI) have been obtained through the use of these sensors. They can also be used in monitoring the “health” of a composite structure and in impact detection to evaluate, for example, the airworthiness of aircraft. Finally, FBGs may be used in instrumentation as composite extensometers or strain rosettes, primarily in civil engineering applications.

Keywords

composite materialsfiber Bragg gratingslaminatesmechanical propertiesoptical-fiber sensorsoptoelectronicsoptical properties.

Information

Type
Research Article
Information
MRS Bulletin , Volume 27 , Issue 5: Optical-Fiber Sensors , May 2002 , pp. 400 - 407
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Sansonetti, P., Ferdinand, P., Bowen, D.H., Crowther, M., Culshaw, B., Martinelli, M., Fornari, B. et al., in Proc. SPIE Conf. on Fiber Optic Smart Structures and Skins II (SPIE—The International Society for Optical Engineering, Bellingham, WA, 1989).Google Scholar
2.Ferdinand, P., Magne, S., Dewynter-Marty, V., Martinez, C., Rougeault, S., and Bugaud, M., “Applications of Bragg Grating Sensors in Europe,” 12th Int. Conf. on Optical Fiber Sensors (OFS-12), Williamsburg, VA, October 28–31, 1997, p. 14.CrossRefGoogle Scholar
3.Crosby, P.A. and Fernando, G.P., in Optical Fiber Sensor Technology, Vol. 3: Applications and Systems, edited by Grattan, K.T.V. and Meggitt, B.T. (Kluwer Academic Publishers, New York, 1999).Google Scholar
4.Laffont, G. and Ferdinand, P., Electron. Lett. 37 (5) (2001) p. 289.CrossRefGoogle Scholar
5.Laffont, G. and Ferdinand, P., Meas. Sci. Technol. 12 (7) (2001) p. 765.CrossRefGoogle Scholar
6.Ferdinand, P., Ferragu, O., Lechien, J.-L., Lescop, B., Marty, V., Rougeault, S., Pierre, G., Renouf, C., Jarret, B., Kotrotsios, G., Voet, M.R.H., and Toscano, D., “Mine Operating Accurate STABILity Control with Optical Fiber Sensing and Bragg Grating Technology: The Brite-EURAM STABILOS Project,” 10th Int. Conf. on Optical Fiber Sensor (OFS-10), Glasgow, October 11–13, 1994, p. 162; J. Lightwave Technol. 13 (7) (1995) p. 1303.Google Scholar
7.Ansari, F., ed., Proc. Int. Workshop on Fiber Optic Sensors for Construction Materials and Bridges (Technomic, Lancaster, PA, 1998).Google Scholar
8.Senhauser, U., Brônnimann, R., Mauron, P., and Nellen, P.M., in Proc. Int. Workshop on Fiber Optic Sensors for Construction Materials and Bridges, edited by Ansari, F. (Technomic, Lancaster, PA, 1998) p. 117.Google Scholar
9.Vohra, S.T., Todd, M.D., Johnson, G.A., Chang, C.C., and Danver, B.A., “Fiber Bragg Grating Sensor System for Civil Structure Monitoring: Applications and Field Test,” 13th Int. Conf. on Optical Fiber Sensor (OFS-13), Kyongju, Korea, April 12–16, 1999, Paper No. Tu2–1, p. 32.CrossRefGoogle Scholar
10.Seim, J., Udd, E., Schulz, W., and Laylor, H.M., “Composite Strengthening and Instrumentation of the Horse Tail Bridge with Long Gauge Length Fiber Bragg Grating Strain Sensors,” 13th Int. Conf. on Optical Fiber Sensor (OFS-13), Kyongju, Korea, April 12–16, 1999, Paper No. P1–3, p. 196.CrossRefGoogle Scholar
11.Seim, J., Udd, E., Schulz, W., and Laylor, H.M., in Proc. SPIE, Vol. 3671 (SPIE—The International Society for Optical Engineering, Belling-ham, WA, 1999) p. 128.Google Scholar
12.Measures, R.M., Alavie, T., Maaskant, R., Huang, S., and LeBlanc, M., “Bragg Grating Fiber Optic Sensing for Bridges and Other Structures,” 2nd European Conf. on Smart Structures and Materials, Glasgow, 1994, p. 162.Google Scholar
13.Livingstone, R.A., in Proc. Int. Workshop on Fiber Optic Sensors for Construction Materials and Bridges, edited by Ansari, F. (Technomic, Lancaster, PA, 1998) p. 3.Google Scholar
14.Ferdinand, P., Magne, S., Marty, V., Rougeault, S., Bernage, P., Douay, M., Fertein, E., Lahoreau, F., Niay, P., Bayon, J.F., Georges, T., and Monerie, M., “Optical Fiber Bragg Grating Sensors for Structure Monitoring within the Nuclear Power Plants,” presented at the Optical Fiber Sensing and Systems in Nuclear Environments Symposium, SCK-CEN, Mol, Belgium, October 17–18, 1994.CrossRefGoogle Scholar
15.Dewynter-Marty, V., Rougeault, S., Ferdinand, P., Chauvel, D., Toppani, E., Leygonie, M., Jarret, B., and Fenaux, P., “Concrete Strain Measurements and Crack Detection with Surface and Embedded Bragg Grating Extensometers,” 12th Int. Conf. on Optical Fiber Sensor (OFS-12), Williamsburg, VA, October 28–31, 1997, p. 600.Google Scholar
16.Ferdinand, P., Magne, S., Dewynter-Marty, V., Pichon, L., Rougeault, S., and Bugaud, M., “Optical Fiber Sensors Provide New Means for Measurement and Monitoring within the Nuclear Industry,” presented at the Int. Nuclear Congress ENC-98, Nice, France, October 25–28, 1998.Google Scholar
17.Ball, A., The Newsletter of the Monitor Consortium (1) (Autumn/Winter 1996) and (2) (Autumn/Winter 1997).Google Scholar
18.Ball, A., in Proc. 4th ESSM and 2nd MIMR Conf., edited by Tomlinson, G.B. and Bullough, W.A. (Institute of Physics Publishing, Bristol, 1998) p. 435.Google Scholar
19.Bocherens, E., Bourasseau, S., Dewynter-Marty, V., Py, S., Dupont, M., Ferdinand, P., and Berenger, H., in Proc. 4th ESSM and 2nd MIMR Conf., edited by Tomlinson, G.B. and Bullough, W.A. (Institute of Physics Publishing, Bristol, 1998) p. 381.Google Scholar
20.Balageas, D., Bourasseau, S., Dupont, M., Bocherens, E., Dewynter-Marty, V., and Ferdinand, P., J. Intell. Mater. Sys. Struct. 11 (2000) (Part 6) p. 426.CrossRefGoogle Scholar
21.Dunphy, J.R., Meltz, G., Lamm, F.P., and Morey, W.W., in Proc. SPIE, Vol. 1370 (SPIE—The International Society for Optical Engineering, Bellingham, WA, 1990) p. 116.Google Scholar
22.Dewynter-Marty, V., Rougeault, S., Ferdinand, P., Bugaud, M., Brion, P., Marc, G., and Plouvier, P., “4 technologies de CFO pour le suivi de fabrication de matériaux composites,” presented at the 19th Journées Nationales d'Optique Guidée (JNOG 1999), December 6–8, 1999, Limoges, France (in French).Google Scholar
23.Dewynter-Marty, V., Rougeault, S., Ferdinand, P., Bugaud, M., Brion, P., Marc, G., and Plouvier, P., “Contrôle de la fabrication de pièces en matériaux composites réalisées par procédé RTM à l'aide de capteurs à réseaux de Bragg,” presented at the 20th Journées Nationales d'Optique Guidée (JNOG 2000), November 20–22, 2000, Toulouse, France (in French).Google Scholar
24.Ness, D., in Proc. 22nd Int. SAMPE Europe Conf. Soc. for the Advancement of Materials and Process Engineering (La Défense, Paris, 2001) p. 89.Google Scholar
25.Maurin, L., Boussoir, J., Rougeault, S., Bugaud, M., Ferdinand, P., Landrot, A., Chauvin, T., and Grunevald, Y.-H., “Instrumentation de Bogie composite par capteurs à fibers optiques à réseaux de Bragg,” presented at the 20th Journées Nationales d'Optique Guidée (JNOG 2000), November 20–22, 2000, Toulouse, France (in French).Google Scholar
26.Magne, S., Rougeault, S., Vilela, M., and Ferdinand, P., Appl. Opt. 36 (36) (1997) p. 9437.CrossRefGoogle Scholar
27.Magne, S., Rougeault, S., Vilela, M., and Ferdinand, P., “Rosettes à réseaux de Bragg et applications,” presented at the Journées Nationales d'Optique Guidée (JNOG 1996), October 28–30, 1996, Nice, France (in French).Google Scholar
28.Ferdinand, P., Magne, S., Dewynter-Marty, V., Rougeault, S., and Bugaud, M., “Optical Fiber Bragg Grating Sensors Make Composite Structures Smart,” presented at the SAMPE Europe Conf. ′99, Paris, April 1999.Google Scholar
29.Bugaud, M., Dewynter-Marty, V., Magne, S., and Ferdinand, P., French Patent No. 2,791,768 (June 10, 2000).Google Scholar
30.Pran, K., Havgard, G.B., Palmstrom, R., Wang, G., Johnson, G.A., Danver, B.A., and Vohra, S.T., “Sea-Test of 27 Channel Fiber Bragg Grating Sensor System on Air Cushion Catamaran,” 13th Int. Conf. on Optical Fiber Sensor (OFS-13), Kyongju, Korea, April 12–16, 1999, Paper No. W1–3, p. 145.CrossRefGoogle Scholar