Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Bu, Xiuming
Li, Yanguang
and
Ho, Johnny C.
2020.
Efficient and stable electrocatalysts for water splitting.
MRS Bulletin,
Vol. 45,
Issue. 7,
p.
531.
Kravchenko, Yaroslav O.
Coy, Emerson
Załęski, Karol
Iatsunskyi, Igor
Pogorielov, Maksym
Korniienko, Viktoriia
Pshyk, Aleksandr V.
Pogrebnjak, Alexander D.
and
Beresnev, Vyacheslav M.
2021.
Biocompatibility and electron microscopy studies of epitaxial nanolaminate (Al0·5Ti0.5)N/ZrN coatings deposited by Arc-PVD technique.
Ceramics International,
Vol. 47,
Issue. 24,
p.
34648.
Coy, Emerson
Babacic, Visnja
Yate, Luis
Załęski, Karol
Kim, Yeonho
Sebastián Reparaz, Juan
Dörling, Bernhard
Graczykowski, Bartlomiej
Iatsunskyi, Igor
and
Siuzdak, Katarzyna
2021.
Study of nanostructured ultra-refractory Tantalum-Hafnium-Carbide electrodes with wide electrochemical stability window.
Chemical Engineering Journal,
Vol. 415,
Issue. ,
p.
128987.
Poornesh, M.
Bhat, Shreeranga
Gijo, E.V.
and
Bellairu, Pavana Kumara
2022.
Enhancing the tensile strength of SiC reinforced aluminium-based functionally graded structure through the mixture design approach.
International Journal of Structural Integrity,
Vol. 13,
Issue. 1,
p.
150.
Pshyk, A.V.
Petrov, I.
Bakhit, B.
Lu, J.
Hultman, L.
and
Greczynski, G.
2023.
Energy-efficient physical vapor deposition of dense and hard Ti-Al-W-N coatings deposited under industrial conditions.
Materials & Design,
Vol. 227,
Issue. ,
p.
111753.
Lodhi, Roop Singh
Rathaur, Ankit
Soni, Anjali
and
Das, Paramita
2024.
Poly(lactic acid)/Cellulose Nanocrystal-Based Compositional Gradient Nanocomposites with Higher Toughness: Potential for Flexible Packaging.
ACS Applied Polymer Materials,
Vol. 6,
Issue. 21,
p.
12947.
Gangil, B.
Ranakoti, L.
Bhandari, P.
Bisht, A.
Biswas, D.
and
Verma, S. K.
2025.
Comparative study of physico‐mechanical wear analysis of gravity die casting and centrifugal methods for waste/nanoparticle‐filled polymer composites.
Materialwissenschaft und Werkstofftechnik,
Vol. 56,
Issue. 8,
p.
1096.
Dong, Yihao
Hussain, Irfan
and
He, Shaoming
2025.
Structural topology optimization of aircraft wing leading edge fabricated of multilayer composites.
Aerospace Science and Technology,
Vol. 159,
Issue. ,
p.
109993.