Hostname: page-component-7f64f4797f-bnl7t Total loading time: 0 Render date: 2025-11-04T00:41:16.500Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of electropulsing treatment on the recrystallization and texture of Ni9W alloy strip

Published online by Cambridge University Press:  27 January 2014

Jianan Liu ,
Wei Liu ,
Guoyi Tang  and
Rufei Zhu
Jianan Liu
Affiliation:
Advanced Materials Institute and Clearer Production Key Laboratory, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, China; and Department of Materials Science and Engineering, Key Laboratory of Advanced Materials, Tsinghua University, Haidian District, Beijing 100084, China
Wei Liu
Affiliation:
Department of Materials Science and Engineering, Key Laboratory of Advanced Materials, Tsinghua University, Haidian District, Beijing 100084, China
Guoyi Tang*
Affiliation:
Advanced Materials Institute and Cleaner Production Key Laboratory, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, China; and Department of Materials Science and Engineering, Key Laboratory of Advanced Materials, Tsinghua University, Haidian District, Beijing 100084, China
Rufei Zhu
Affiliation:
Department of Materials Science and Engineering, Key Laboratory of Advanced Materials, Tsinghua University, Haidian District, Beijing 100084, China
*
a) Address all correspondence to this author. e-mail: tanggy@mail.tsinghua.edu.cn
Get access

Abstract

The effects of electropulsing treatment (EPT) on the recrystallization and texture of Ni9W alloy were investigated using micro-hardness and electron backscattered diffraction patterns. It is found that compared with conventional annealing, EPT tremendously accelerates the recrystallization process of Ni9W alloy. Moreover, the full recrystallization temperature of EPT is decreased by ∼180 °C. The rapid recrystallization process is attributed to the substantial increase in the atomic flux resulting from the athermal effect. EPT also significantly reduces the intensity of cube texture after full recrystallization. The evolution of recrystallization microstructure and texture reveals that EPT greatly increases the proportion of noncube oriented nuclei but has little effect on the size advantage of cube grains. It is suggested that the change of recrystallization texture results from the different effects of EPT on cube band nucleation and shear band nucleation.

Keywords

annealingtexturemetal

Information

Type
Articles
Information
Journal of Materials Research , Volume 29 , Issue 4 , 28 February 2014 , pp. 596 - 603
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

Baranov, Y., Gromov, V., and Tang, G.: Electromagnetic fields effect on the structure and characteristics of materials. In Book of the International Seminar Articles, 19–21 May 2009, Institute for Machines Science of the Russian Academy of Sciences Moscow, edited by Gromov, V. and Tang., G. (Novokuznetsk Polygraphic Center, Novokuznetsk, 2009); p. 380.Google Scholar
Gromov, V.: Fundamental aspects of external fields action on materials. In Book of the International Conference, 26–28 May, 2010, Advanced Materials Institute, Graduate School at Shenzhen Tsinghua University, edited by Gromov, V. and Tang., G. (Novokuznetsk Polygraphic Center, Novokuznetsk, 2010); p. 613.Google Scholar
Conrad, H., Karam, N., and Mannan, S.: Effect of electric current pulses on the recrystallization of copper. Scr. Metall. 17(3), 411 (1983).Google Scholar
Conrad, H., Sprecher, A., Cao, W.D., and Lu, X.P.: Effects of high-density electric current pulses on the annealing of copper. In Homogenization and Annealing of Aluminum and Copper Alloys, edited by Merchant, H.D., Crane, J., Chia, E.H.. [TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 1988]; p. 227.Google Scholar
Xu, Z., Tang, G., Ding, F., Tian, S., and Tian, H.: The effect of multiple pulse treatment on the recrystallization behavior of Mg-3Al-1Zn alloy strip. Appl. Phys. A 88(2), 429 (2007).CrossRefGoogle Scholar
Zhou, Y., Xiao, S., and Guo, J.: Recrystallized microstructure in cold worked brass produced by electropulsing treatment. Mater. Lett. 58(12), 1948 (2004).Google Scholar
Hu, G., Tang, G., Zhu, Y., and Shek, C.: Electropulsing induced texture evolution in the recrystallization of Fe-3 Pct Si alloy strip. Metall. Mater. Trans. A 42(11), 3484 (2011).Google Scholar
Sprecher, A., Mannan, S., and Conrad, H.: Overview no. 49: On the mechanisms for the electroplastic effect in metals. Acta Metall. 34(7), 1145 (1986).CrossRefGoogle Scholar
Du, X., Yin, S., Liu, S., Wang, B., and Guo, J.: Effect of the electropulsing on mechanical properties and microstructure of an ECAPed AZ31 Mg alloy. J. Mater. Res. 23(6), 1570 (2008).Google Scholar
Guan, L., Tang, G., Jiang, Y., and Chu, P.K.: Texture evolution in cold-rolled AZ31 magnesium alloy during electropulsing treatment. J. Alloys Compd. 487(1), 309 (2009).CrossRefGoogle Scholar
Eickemeyer, J., Selbmann, D., Optiz, R., Maher, E., and Prusseit, W.: Effect of nickel purity on cube texture formation in RABiT-tapes. Physica C 341, 2425 (2000).Google Scholar
Claassen, J. and Thieme, C.: Magnetic properties of Ni-based substrates for HTS tape. Supercond. Sci. Technol. 21(10), 105003 (2008).Google Scholar
Eickemeyer, J., Hühne, R., Güth, A., Rodig, C., Gaitzsch, U., Freudenberger, J., Schultz, L., and Holzapfel, B.: Textured Ni–9.0 at.% W substrate tapes for YBCO-coated conductors. Supercond. Sci. Technol. 23, 085012 (2010).Google Scholar
Yu, H. and Liu, W.: Effect of temperature on microstructure and texture of rolled Ni-9.3 at-% W alloy. J. Mater. Sci. Technol. 27(9), 1412 (2011).Google Scholar
Subramanya Sarma, V., Eickemeyer, J., Schultz, L., and Holzapfel, B.: Recrystallisation texture and magnetisation behaviour of some FCC Ni–W alloys. Scr. Mater. 50(7), 953 (2004).Google Scholar
Li, X., Liu, W., Godfrey, A., Juul Jensen, D., and Liu, Q.: Development of the cube texture at low annealing temperatures in highly rolled pure nickel. Acta Mater. 55(10), 3531 (2007).Google Scholar
Liu, Z.Y., Deng, X.T., and Weng, Y.Z.: Effects of electric current pulse on the dynamics of dynamic recrystallization in 2091 Al-Li alloy. Chin. J. Mater. Res. 15, 358 (2001).Google Scholar
Jiang, Y., Tang, G., Shek, C., and Liu, W.: Microstructure and texture evolution of the cold-rolled AZ91 magnesium alloy strip under electropulsing treatment. J. Alloys Compd. 509(11), 4308 (2011).Google Scholar
Xu, Z.: Applied fundamental research of the high-density pulses on the processing of wrought magnesium alloy thin strip. Ph.D. Thesis, Tsinghua University, Beijing, 2007.Google Scholar
Jiang, Y.: Applied fundamental research of the high-density electropulsing on the manufacturing of AZ91 magnesium alloy strip. Ph.D. Thesis, Tsinghua University, Beijing, 2010.Google Scholar
Bhattacharjee, P., Ray, R., and Tsuji, N.: Cold rolling and recrystallization textures of a Ni–5at.% W alloy. Acta Mater. 57(7), 2166 (2009).Google Scholar
Doherty, R.D.: Nucleation and growth kinetics of different recrystallization texture components. Scr. Metall. 19(8), 927 (1985).Google Scholar
Jiang, Y., Guan, L., Tang, G., Shek, C., and Zhang, Z.: Influence of electropulsing treatment on microstructure and mechanical properties of cold-rolled Mg–9Al–1Zn alloy strip. Mater. Sci. Eng., A 528(16), 5627 (2011).Google Scholar
Hu, G., Shek, C., Zhu, Y., Tang, G., and Qing, X.: Effect of electropulsing on recrystallization of Fe-3% Si alloy strip. Mater. Trans. 51(8), 1390 (2010).Google Scholar
Zhou, Y., Zhang, W., Wang, B., He, G., and Guo, J.: Grain refinement and formation of ultrafine-grained microstructure in a low-carbon steel under electropulsing. J. Mater. Res. 17(8), 2105 (2002).CrossRefGoogle Scholar
Zhou, Y., Guo, J., Zhang, W., and He, G.: Influence of electropulsing on nucleation during phase transformation. J. Mater. Res. 17(12), 3012 (2002).Google Scholar
Dolinsky, Y. and Elperin, T.: Thermodynamics of phase transitions in current-carrying conductors. Phys. Rev. B 47(22), 14778 (1993).Google Scholar
Dolinsky, Y. and Elperin, T.: Thermodynamics of nucleation in current-carrying conductors. Phys. Rev. B 50(1), 52 (1994).Google Scholar
Duggan, B., Hatherly, M., Hutchinson, W., and Wakefield, P.: Deformation structures and textures in cold-rolled 70:30 brass. Metal Sci. 12(8), 343 (1978).Google Scholar
Doherty, R., Hughes, D., Humphreys, F., Jonas, J., Jensen, D.J., Kassner, M., King, W., McNelley, T., McQueen, H., and Rollett, A.: Current issues in recrystallization: A review. Mater. Sci. Eng., A 238(2), 219 (1997).Google Scholar
Ridha, A. and Hutchinson, W.: Recrystallisation mechanisms and the origin of cube texture in copper. Acta Metall. 30(10), 1929 (1982).Google Scholar