Hostname: page-component-cb9f654ff-k7rjm Total loading time: 0 Render date: 2025-09-04T15:09:22.024Z Has data issue: false hasContentIssue false
  • English
  • Français

A high specific strength, deformation-processed scandium-titanium composite

Published online by Cambridge University Press:  26 July 2012

A. M. Russell ,
Y. Tian ,
J. D. Rose ,
T. W. Ellis  and
L. S. Chumbley
A. M. Russell
Affiliation:
Ames Laboratory, Iowa State University, Ames, Iowa 50011
Y. Tian
Affiliation:
Ames Laboratory, Iowa State University, Ames, Iowa 50011
J. D. Rose
Affiliation:
U.S. Steel Company, Gary, Indiana 46402
T. W. Ellis
Affiliation:
Kulicke & Soffa Industries, Inc., Willow Grove, Pennsylvania 19090
L. S. Chumbley
Affiliation:
Ames Laboratory, Iowa State University, Ames, Iowa 50011
Get access

Extract

A 59% Sc–41% Ti deformation-processed metal-metal composite was produced by rolling to a true strain of 2.3 at 873 K followed by cold rolling to a total true strain of 3.6. Rolling reduced the original eutectoid microstructure to lamellae of α–Sc and α–Ti with average lamellar thicknesses of 150 nm (Sc) and 120 nm (Ti). The cold-rolledmaterial had an ultimate tensile strength of 942 MPa and a specific strength of 259 J/g. The Sc matrix was oriented with the 〈0001〉 tilted 22° from the sheet normal direction toward the rolling direction, an unusual texture for an HCP metal with a low c/a ratio, which suggests Sc may deform primarily by basal slip.

Information

Type
Articles
Information
Journal of Materials Research , Volume 14 , Issue 1 , January 1999 , pp. 8 - 11
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1.Thermochemical and Physical Properties, Version 2.0 (E S Microware, Hamilton, OH, 1994).Google Scholar
2.Geiselman, D., J. Less Common Metals 4, 362 (1986).Google Scholar
3.Savitskiy, E.M., Terekhova, V. F., and Naumkin, O. P., Usp. Fiz. Nauk 79, 263 (1963) [Sov. Phys. Usp. 6, 123 (1963)].CrossRefGoogle Scholar
4.Savitskiy, E.M., Redkie Metally i Splavy (Rare Metals and Alloys) (Dom Tekhniki, Moscow, 1959), p. 19.Google Scholar
5.Sokolov, L.D., Solenov, V.M., Skudnov, V. A., and Gladkikh, A. N., Izv. Akad. Nauk SSSR. Metal. 2, 181 (1970) [Russ. Met. 2, 106 (1970)].Google Scholar
6.Zalesky, M. P., M. S. Thesis, Iowa State University, Ames, IA (1980).Google Scholar
7.Bevk, J., Harbison, J. P., and Bell, J. L., J. Appl. Phys. 49 (12), 6031 (1978).CrossRefGoogle Scholar
8.Verhoeven, J. D., Schmidt, F. A., Gibson, E.D., and Spitzig, W.A., J. Metals 38 (9), 20 (1978).Google Scholar
9.Verhoeven, J. D., Spitzig, W. A., Jones, L. L., Downing, H. L., Trybus, C. L., Gibson, E. D., Chumbley, L.S., Fritzmeier, L. G., and Schnittgrund, G. D., J. Mater. Eng. 12 (2), 124 (1990).Google Scholar
10.Spitzig, W.A. and Krotz, P. D., Acta Metall. 36 (7), 1709 (1988).CrossRefGoogle Scholar
11.Verhoeven, J. D., Spitzig, W. A., Schmidt, F. A., and Trybus, C. L., Mater. Manufacturing Processes 4 (2), 197 (1989).Google Scholar
12.Thieme, C. L. H., Pourrahimi, S., and Foner, S., Scripta Metall. Mater. 28, 913 (1993).Google Scholar
13.Russell, A. M., Lund, T., Chumbley, L.S., Laabs, F.C., Keehner, L. L., and Harringa, J.L., Composites: Part A (in press).Google Scholar
14.Russell, A. M., Chumbley, L. S., Ellis, T.W., Laabs, F. C., Norris, B., and Donizetti, G. E., J. Mater. Sci. 30, 4249 (1995).Google Scholar
15.Jensen, J. A., Russell, A. M., Ellis, T. W., and Chumbley, L.S., in Trace & Reactive Metals: Processing and Technology, edited by Reddy, R. G. and Mishra, B. (TMS Publications, Warrendale, PA, 1995), p. 508.Google Scholar
16.Anderson, E.A., Jillson, D. C., and Dunbar, S. R., J. Metals Trans AIME 197, 1191 (1953).Google Scholar
17.Scott, T.E., in Handbook on the Physics and Chemistry of the Rare Earths: Volume 1—Metals, edited by Gschneidner, K. A. Jr., and Eyring, L. R. (North-Holland Publishing, Amsterdam, 1978), p. 608.Google Scholar
18.Christ, B.W., ASM Metals Handbook, Vol. 8 (ASM INTERNATIONAL, Materials Park, OH, 1988), p. 28.Google Scholar
19.Donachie, M.J., Titanium: A Technical Guide (ASM INTERNATIONAL, Materials Park, OH, 1988), p. 450.Google Scholar
20.Beaudry, B.J. and Daane, A.H., Trans. AIME 224, 770 (1962).Google Scholar
21.Trybus, C.A., Ph.D. dissertation, Iowa State University, Ames, IA (1988).Google Scholar
22.Kampe, J. C. Malzahn, Courtney, T.H., and Leng, Y., Acta Metall. 37 (7), 1735–1745 (1989).CrossRefGoogle Scholar
23.Courtney, T.H. and Malzahn, J. C.Kampe, Acta Metall. 37 (7), 1747 (1989).Google Scholar
24.Morris, D.G. and Morris, M. A., Acta Metall. Mater. 39 (8), 1763 (1991).CrossRefGoogle Scholar
25.Scott, T.E., op. cit., p. 621.Google Scholar
26.Bell, R.L. and Cahn, R. W., Proc. R. Soc. A239, 494 (1957).Google Scholar
27.Chin, G.Y., ASM Metals Handbook, Vol. 8 (ASM INTERNATIONAL, Materials Park, OH, 1985), p. 229.Google Scholar