Elimination of an isolated pore: Effect of grain size

Wan Y. Shih; Wei-Heng Shih; Ilhan A. Aksay

doi:10.1557/JMR.1995.1000

Frost, Harold J and Thompson, Carl V 1996. Computer simulation of grain growth. Current Opinion in Solid State and Materials Science, Vol. 1, Issue. 3, p. 361.

He, L. and Ma, E. 1996. Full-density nanocrystalline Fe–29Al–2Cr intermetallic consolidated from mechanically milled powders. Journal of Materials Research, Vol. 11, Issue. 1, p. 72.

Ter Ovanesyan, E. Manassen, Y. Ramesh Rao, N. and Olami, Z. 1997. Diffusional attractions between voids on a Si(111)7×7 surface. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, Vol. 15, Issue. 4, p. 1317.

Dudek, M.R. Gouyet, J.-F. and Kolb, Max 1998. Q+1 state Potts model of late stage sintering. Surface Science, Vol. 401, Issue. 2, p. 220.

Zhu, Su-Ming and Iwasaki, Kunihiko 1999. Microstructure and Mechanical Properties of Mechanically Alloyed and HIP-Consolidated Fe<SUB>3</SUB>Al. Materials Transactions, JIM, Vol. 40, Issue. 12, p. 1461.

Manassen, Y. Ramesh Rao, N. Mukhopadhyay, I. Ter-Ovanesyan, E. and Olami, Z. 1999. Anomalous coarsening process of voids, steps, and denuded zones on aSi(111)7×7surface. Physical Review E, Vol. 59, Issue. 3, p. 2664.

Chaim, Rachman Shen, Zhijian and Nygren, Mats 2004. Transparent nanocrystalline MgO by rapid and low-temperature spark plasma sintering. Journal of Materials Research, Vol. 19, Issue. 9, p. 2527.

Chaim, Rachman Shen, Zhijian and Nygren, Mats 2006. Ceramic Nanomaterials and Nanotechnology III. Vol. 159, Issue. , p. 21.

Jazi, H. R. Salimi Coyle, T. W. and Mostaghimi, J. 2007. Understanding Grain Growth and Pore Elimination in Vacuum-Plasma-Sprayed Titanium Alloy. Metallurgical and Materials Transactions A, Vol. 38, Issue. 3, p. 476.

Chaim, R. Levin, M. Shlayer, A. and Estournes, C. 2008. Sintering and densification of nanocrystalline ceramic oxide powders: a review. Advances in Applied Ceramics, Vol. 107, Issue. 3, p. 159.

Peng, Jian Wang, Chuanbin Li, Ling Wang, Fang Shen, Qiang and Zhang, Lian-meng 2012. Improvement of sinterability of barium dititanate powders by ball-milling. Journal of Materials Science: Materials in Electronics, Vol. 23, Issue. 3, p. 706.

Hallmann, Lubica Ulmer, Peter Reusser, Eric Louvel, Marion and Hämmerle, Christoph H.F. 2012. Effect of dopants and sintering temperature on microstructure and low temperature degradation of dental Y-TZP-zirconia. Journal of the European Ceramic Society, Vol. 32, Issue. 16, p. 4091.

Azarmi, F. and Salimijazi, H.R. 2015. Grain growth and pore elimination in Inconel 625 deposited by APS. Surface and Coatings Technology, Vol. 268, Issue. , p. 3.

Greenquist, Ian Tonks, Michael R. and Zhang, Yongfeng 2018. Review of sintering and densification in nuclear fuels: Physical mechanisms, experimental results, and computational models. Journal of Nuclear Materials, Vol. 507, Issue. , p. 381.

Khraisat, Walid Abu Jadayil, Wisam Rawashdeh, Nathir Borgström, Henrik and Stojanovic, Blaza 2018. The role of phosphorus in pore rounding of sintered steels. Cogent Engineering, Vol. 5, Issue. 1, p. 1452350.

Lee, Jeong-Han Oh, Ik-Hyun Kim, Ju-Hun Hong, Sung-Kil and Park, Hyun-Kuk 2021. Rapid Consolidation of WC-ZrSiO4 Hard Materials by Spark Plasma Sintering: Microstructure, Densification, and Mechanical Properties. Metals and Materials International, Vol. 27, Issue. 9, p. 3409.

Tikar, Abhishek Padwal, Shubhankar Chen, Shih-Hsun and Harimkar, Sandip P. 2023. Analyzing the Phase Evolution, Microstructure and Wear Response of Spark Plasma Sintered Al0.5CoCrFeNi2 High Entropy Superalloy. Advanced Engineering Materials, Vol. 25, Issue. 9,

Save article to Kindle

Save article to Dropbox

Save article to Google Drive

Reply to: Submit a response

Your details

You have entered the maximum number of contributors

Conflicting interests