Hostname: page-component-7dd5485656-6kn8j Total loading time: 0 Render date: 2025-10-31T22:05:10.407Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Ti substitution for Al on the cuboidal nanoprecipitates in Al0.7NiCoFeCr2 high-entropy alloys

Published online by Cambridge University Press:  01 August 2018

Chunling Li Open the ORCID record for Chunling Li [Opens in a new window] ,
Yue Ma ,
Jiamiao Hao ,
Qing Wang ,
Shujie Pang ,
Chuang Dong  and
Peter K. Liaw
Chunling Li
Affiliation:
Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
Yue Ma
Affiliation:
Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
Jiamiao Hao
Affiliation:
Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
Qing Wang*
Affiliation:
Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
Shujie Pang
Affiliation:
Key Laboratory of Aerospace Materials and Performance (Ministry of Education), School of Materials Science and Engineering, Beihang University, Beijing 100191, China
Chuang Dong
Affiliation:
Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
Peter K. Liaw
Affiliation:
Department of Materials Science and Engineering, The University of Tennessee, Knoxville, Tennessee 37996, USA
*
a)Address all correspondence to this author. e-mail: wangq@dlut.edu.cn
Get access

Abstract

Coherent cuboidal B2 nanoprecipitation in body-centered cubic (BCC)-based high-entropy alloys (HEAs) is important for the improvement of mechanical strength. The present work primarily investigated the effect of Ti substitution for Al on the cuboidal B2 nanoprecipitates in BCC Al0.7NiCoFeCr2 HEAs. A series of (Al,Ti)0.7NiCoFeCr2 HEAs with different Al/Ti ratios were prepared by suction-cast processing, and their microstructures and mechanical properties were then characterized comprehensively. It was found that the substitution of Ti for Al can change the phase structures of ordered precipitation, from the B2-AlNi to a highly ordered L21-Ni2AlTi phase. Especially, a small amount addition of Ti (≤4.2 at.%, Al/Ti ratio ≥2/1) renders the HEAs with cuboidal L21 nanoparticles coherently precipitated into the BCC matrix, which is attributed to the moderate lattice misfit (ε = 0.5–0.6%) between BCC and L21 phases. HEAs with such coherent microstructures exhibit high compressive yield strength of about 1700–1800 MPa. When the Ti content reaches up to 6.25 at.%, the matrix of the alloy will be turned into the σ phase, rather than BCC, leading to a heavy brittleness.

Keywords

microstructurephase transformationstrengthhigh-entropy alloyscoherent precipitation

Information

Type
Article
Information
Journal of Materials Research , Volume 33 , Issue 19: Focus Issue: Fundamental Understanding and Applications of High-Entropy Alloys , 14 October 2018 , pp. 3266 - 3275
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

Footnotes

b)

This author was an editor of this journal during the review and decision stage. For the JMR policy on review and publication of manuscripts authored by editors, please refer to http://www.mrs.org/editor-manuscripts/.

References

REFERENCES

Yeh, J.W., Chen, S.K., Lin, S.J., Gan, J.Y., Chin, T.S., Shun, T.T., Tsau, C.H., and Chang, S.Y.: Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes. Adv. Eng. Mater. 6, 299 (2004).CrossRefGoogle Scholar
Zhang, Y., Zuo, T.T., Tang, Z., Gao, M.C., Dahmen, K.A., Liaw, P.K., and Lu, Z.P.: Microstructures and properties of high-entropy alloys. Prog. Mater. Sci. 61, 1 (2014).CrossRefGoogle Scholar
Miracle, D.B. and Senkov, O.N.: A critical review of high entropy alloys and related concepts. Acta Mater. 122, 448 (2016).CrossRefGoogle Scholar
Senkov, O.N., Miller, J.D., Miracle, D.B., and Woodward, C.: Accelerated exploration of multi-principal element alloys with solid solution phases. Nat. Commun. 6, 6529 (2015).CrossRefGoogle ScholarPubMed
Gao, M.C., Liaw, P.K., Yeh, J.W., and Zhang, Y.: High-entropy Alloys: Fundamentals and Applications, 1st ed. (Springer International Publishing, Cham, 2016).CrossRefGoogle Scholar
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E.H., George, E.P., and Ritchie, R.O.: A fracture-resistant high-entropy alloy for cryogenic applications. Science 345, 1153 (2014).CrossRefGoogle ScholarPubMed
Otto, F., Dlouhy, A., Somsen, C., Bei, H., Eggeler, G., and George, E.P.: The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy. Acta Mater. 61, 5743 (2013).CrossRefGoogle Scholar
Senkov, O.N., Wilks, G.B., Scott, J.M., and Miracle, D.B.: Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys. Intermetallics 19, 698 (2011).CrossRefGoogle Scholar
Senkov, O.N., Scott, J.M., Senkova, S.V., Miracle, D.B., and Woodward, C.F.: Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy. J. Alloys Compd. 509, 6043 (2011).CrossRefGoogle Scholar
Senkov, O.N., Senkova, S.V., and Woodward, C.F.: Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys. Acta Mater. 68, 214 (2014).CrossRefGoogle Scholar
Youssef, K.M., Zaddach, A.J., Niu, C., Lrving, D.L., and Koch, C.C.: A novel low-density, high-hardness, high-entropy alloy with close-packed single-phase nanocrystalline structures. Mater. Res. Lett. 3, 95 (2015).CrossRefGoogle Scholar
Takeuchi, A., Amiya, K., Wada, T., Yubuta, K., and Zhang, W.: High-entropy alloys with a hexagonal close-packed structure designed by equi-atomic alloy strategy and binary phase diagrams. JOM 66, 1984 (2014).CrossRefGoogle Scholar
Gao, M.C., Zhang, B., Guo, S.M., Qiao, J.W., and Hawk, J.A.: High-entropy alloys in hexagonal close packed structure. Metall. Mater. Trans. A 47, 3322 (2016).CrossRefGoogle Scholar
Hemphill, M.A., Yuan, T., Wang, G.Y., Yeh, J.W., Tsai, C.W., Chuang, A., and Liaw, P.K.: Fatigue behavior of high entropy alloys. Acta Mater. 60, 5723 (2012).CrossRefGoogle Scholar
He, J.Y., Wang, H., Huang, H.L., Xu, X.D., Chen, M.W., Wu, Y., Liu, X.J., Nieh, T.G., An, K., and Lu, Z.P.: A precipitation-hardened high-entropy alloy with outstanding tensile properties. Acta Mater. 102, 187 (2016).CrossRefGoogle Scholar
Li, D.Y., Li, C.X., Feng, T., Zhang, Y.D., Shang, G., Lewandowski, J.J., Liaw, P.K., and Zhang, Y.: High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures. Acta Mater. 123, 285 (2017).CrossRefGoogle Scholar
Niu, S.Z., Kou, H.C., Guo, T., Zhang, Y., Wang, J., and Li, J.S.: Strengthening of nanoprecipitations in an annealed Al0.5CoCrFeNi high entropy alloy. Mater. Sci. Eng., A 671, 82 (2016).CrossRefGoogle Scholar
Ardell, A.J.: Precipitation hardening. Metall. Trans. A 16, 2131 (1985).CrossRefGoogle Scholar
Argon, A.: Strengthening Mechanisms in Crystal Plasticity (Oxford University Press, Oxford, U.K., 2007).CrossRefGoogle Scholar
Caron, P. and Khan, T.: Evolution of Ni-based superalloys for single crystal gas turbine blade applications. Aerosp. Sci. Technol 3, 513 (1999).CrossRefGoogle Scholar
Goerler, J.V., Lopez-galilea, I., Roncery, L.M., Shchyglo, O., Theisen, W., and Steinbachet, I.: Topological phase inversion after long-term thermal exposure of nickel-base superalloys: Experiment and phase-field simulation. Acta Mater. 124, 151 (2017).CrossRefGoogle Scholar
He, J.Y., Wang, H., Wu, Y., Liu, X.J., Mao, H.H., Nieh, T.G., and Lu, Z.P.: Precipitation behavior and its effects on tensile properties of FeCoNiCr high-entropy alloys. Intermetallics 79, 41 (2016).CrossRefGoogle Scholar
Wang, Q., Ma, Y., Jiang, B.B., Li, X.N., Shi, Y., Dong, C., and Liaw, P.K.: A cuboidal B2 nanoprecipitation-enhanced body-centered-cubic alloy Al0.7CoCrFe2Ni with prominent tensile properties. Scr. Mater. 120, 85 (2016).CrossRefGoogle Scholar
Ma, Y., Jiang, B.B., Li, C.L., Dong, C., Liaw, P.K., Xu, F., and Sun, L.X.: The BCC/B2 morphologies in AlxNiCoFeCr high-entropy alloys. Metals 7, 57 (2017).CrossRefGoogle Scholar
Wang, W.R., Wang, W.L., and Yeh, J.W.: Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures. J. Alloys Compd. 589, 143 (2014).CrossRefGoogle Scholar
Chen, R.R., Qin, G., Zheng, H.T., Wang, L., Su, Y.Q., Chiu, Y.L., Ding, H.S., Guo, J.J., and Fu, H.Z.: Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility. Acta Mater. 144, 129 (2018).CrossRefGoogle Scholar
Na, Y.S., Lim, K.R., Chang, H.J., and Kim, J.: Effect of trace additions of Ti on the microstructure of AlCoCrFeNi-based high entropy alloy. Sci. Adv. Mater. 8, 1984 (2016).CrossRefGoogle Scholar
Zhou, Y.J., Zhang, Y., Wang, Y.L., and Chen, G.L.: Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties. Appl. Phys. Lett. 90, 253 (2007).CrossRefGoogle Scholar
Zhang, K.B., Fu, Z.Y., Zhang, J.Y., Wang, W.M., Wang, H., Wang, Y.C., Zhang, Q.J., and Shi, J.: Microstructure and mechanical properties of CoCrFeNiTiAlx, high-entropy alloys. Mater. Sci. Eng., A 508, 214 (2009).CrossRefGoogle Scholar
Gwalani, B., Ayyagari, A.V., Choudhuri, D., Scharf, T., Mukherjee, S., Gibson, M., and Banerjee, R.: Microstructure and wear resistance of an intermetallic-based Al0.25Ti0.75CoCrFeNi high entropy alloy. Mater. Chem. Phys. 210, 197 (2018).CrossRefGoogle Scholar
Shun, T.T., Chang, L.Y., and Shiu, M.H.: Microstructure and mechanical properties of multiprincipal component CoCrFeNiMox alloys. Mater. Sci. Eng., A 556, 170 (2012).CrossRefGoogle Scholar
Zhu, S.M., Tjong, S.C., and Lai, J.K.L.: Creep behavior of a β′ (NiAl) precipitation strengthened ferritic Fe–Cr–Ni–Al alloy. Acta Mater. 46, 2969 (1998).CrossRefGoogle Scholar
Stallybrass, C., Schneider, A., and Sauthoff, G.: The strengthening effect of (Ni,Fe)Al precipitates on the mechanical properties at high temperatures of ferritic Fe–Al–Ni–Cr alloys. Intermetallics 13, 1263 (2005).CrossRefGoogle Scholar
Song, G., Sun, Z., Li, L., Xu, X., Rawlings, M., Liebscher, C.H., Clausen, B., Poplawsky, J., Leonard, D.N., Huang, S.Y., Teng, Z.K., Liu, C.T., Asta, M.D., Gao, Y.F., Dunand, D.C., Ghosh, G., Chen, M.W., Fine, M.E., and Liaw, P.K.: Ferritic alloys with extreme creep resistance via coherent hierarchical precipitates. Sci. Rep. 5, 16327 (2015).CrossRefGoogle ScholarPubMed
Song, G., Sun, Z., Poplawsky, J.D., Gao, Y., and Liaw, P.K.: Microstructural evolution of single Ni2TiAl or hierarchical NiAl/Ni2TiAl precipitates in Fe–Ni–Al–Cr–Ti ferritic alloys during thermal treatment for elevated-temperature applications. Acta Mater. 127, 1 (2017).CrossRefGoogle Scholar
Rawlings, M.J.S., Liebscher, C.H., Asta, M., and Dunand, D.C.: Effect of titanium additions upon microstructure and properties of precipitation-strengthened Fe–Ni–Al–Cr ferritic alloys. Acta Mater. 128, 103 (2017).CrossRefGoogle Scholar
Feng, R., Gao, M.C., Zhang, C., Guo, W., Poplawsky, J.D., Zhang, F., Hawk, J.A., Neuefeind, J.C., Ren, Y., and Liaw, P.K.: Phase stability and transformation in a light-weight high-entropy. Acta Mater. 146, 280 (2018).CrossRefGoogle Scholar
Ma, Y., Wang, Q., Jiang, B.B., Li, C.L., Hao, J.M., Li, X.N., Dong, C., and Nieh, T.G.: Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions. Acta Mater. 147, 213 (2018).CrossRefGoogle Scholar
Pang, C., Jiang, B.B., Shi, Y., Wang, Q., and Dong, C.: Cluster-plus-glue-atom model and universal composition formulas [cluster](glue atom)x for BCC solid solution alloys. J. Alloys Compd. 652, 63 (2015).CrossRefGoogle Scholar
Takeuchi, A. and Inoue, A.: Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys. Mater. Trans., JIM 41, 1372 (2007).CrossRefGoogle Scholar
Cullity, D.B. and Stock, S.R.: Elements of X-Ray Diffraction, 3rd ed. (Prentice Hall, Englewood, 2001).Google Scholar
Polvani, R.S., Tzeng, W.S., and Strutt, P.R.: High temperature creep in a semi-coherent NiAl–Ni2AlTi alloy. Metall. Trans. A 7, 33 (1976).CrossRefGoogle Scholar
Strutt, P.R., Polvani, R.S., and Ingram, J.C.: Creep behavior of the heusler type structure alloy Ni2AlTi. Metall. Trans. A 7, 23 (1976).CrossRefGoogle Scholar
Voorhees, P.W., Mcfadden, G.B., and Johnson, W.C.: On the morphological development of second-phase particles in elastically-stressed solids. Acta Metall. Mater. 40, 2979 (1992).CrossRefGoogle Scholar
Fratzl, P., Penrose, O., and Lebowitz, J.L.: Modeling of phase separation in alloys with coherent elastic misfit. J. Stat. Phys. 95, 1429 (1999).CrossRefGoogle Scholar
Thompson, M.E., Su, C.S., and Voorhees, P.W.: The equilibrium shape of a misfitting precipitate. Acta Metall. Mater. 42, 2107 (1994).CrossRefGoogle Scholar
Nembach, E.: Precipitation hardening caused by a difference in shear modulus between particle and matrix. Phys. Status Solidi 78, 571 (1983).CrossRefGoogle Scholar
Hosford, W.F.: Mechanical Behavior of Materials, 1st ed. (Cambridge University Press, Cambridge, 2005).CrossRefGoogle Scholar
Jansson, B. and Melander, A.: On the critical resolved shear stress from misfitting particles. Scr. Metall. 12, 497 (1978).CrossRefGoogle Scholar
ASM International Handbook Committee: Properties and Selection: Irons, Steels and High Performance Alloys, 2nd ed. (ASM International, Ohio, 1993).Google Scholar