Hostname: page-component-745bb68f8f-cphqk Total loading time: 0 Render date: 2025-01-11T21:01:51.704Z Has data issue: false hasContentIssue false
  • English
  • Français

The effect of porosity on the austenite to bainite transformation in powder metallurgy steels

Published online by Cambridge University Press:  31 January 2011

Virendra S. Warke ,
Richard D. Sisson Jr.  and
Makhlouf M. Makhlouf
Virendra S. Warke*
Affiliation:
Materials Science and Engineering Program, Worcester Polytechnic Institute, Worcester, Massachusetts 01609
Makhlouf M. Makhlouf
Affiliation:
Materials Science and Engineering Program, Worcester Polytechnic Institute, Worcester, Massachusetts 01609
*
a) Address all correspondence to this author. email: virendra.warke@bodycote.com
Get access

Abstract

The effect of porosity on the kinetics of the austenite to bainite isothermal transformation in powder metallurgy steels was characterized using a high-speed quenching dilatometer. The measurements revealed that the presence of porosity shortens the incubation time as well as the overall isothermal transformation time. An Avrami-type equation was fitted to the measured data, and the effect of porosity on the nucleation rate of bainite was quantified. In addition, the activation energy for diffusion of carbon atoms during nucleation of bainite was calculated and was found to decrease with increasing porosity.

Keywords

KineticsNucleation & growthPhase transformation
Type
Articles
Information
Journal of Materials Research , Volume 24 , Issue 10 , October 2009 , pp. 3213 - 3219
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Pustovoit, V.N., Churyukin, Y.N., and Blinovskij, V.A.: Criterion for the influence of porosity on phase transformation in PM steels. Izv AN USSR Met. 2, 90 (1991).Google Scholar
2.Ermakov, S.S., Kukushkin, N.N., and Reznikov, G.T.: Investigation of processes in heat treatment of sintered steels. Powder Metallurgy Materials. Kiev: IPM AN USSR (1976), p. 56.Google Scholar
3.Ermakov, S.S.: Few aspects of theory and practice of heat treatment of sintered steels. Powder Metallurgy Materials. Kiev: IPM AN USSR (1980), p. 150.Google Scholar
4.Quidort, D. and Brechet, Y.J.M.: A model of isothermal and non isothermal transformation kinetics of bainite in 0.5% C steels. ISIJ Int. 42, 1010 (2002).CrossRefGoogle Scholar
5.Porter, D.A. and Easterling, K.E.: Phase Transformations in Metals and Alloys, 2nd ed. (CRC Press, Reprinted by Nelson Thornes Ltd., Cheltenham, UK, 2001), pp. 263, 379.Google Scholar
6.Hawbolt, E.B., Chau, B., and Brimacombe, J.K.: Kinetics of austenite-pearlite transformation in eutectoid carbon steel. Metall. Trans. A 14, 1803 (1983).CrossRefGoogle Scholar
7.Quidort, D. and Brechet, Y.J.M.: Isothermal kinetics of bainite in 0.5% C steels. Acta Mater. 49, 4161 (2001).CrossRefGoogle Scholar
8.Philibert, J.: Atom Movements, Diffusion, and Mass Transport in Solids (EDP Sciences Editions, France, 1991), pp. 510, 560.Google Scholar
9.Kaufman, L., Radcliffe, S.V., and Cohen, M.: Thermodynamics of the Bainite Reaction: Decomposition of Austenite by Diffusional Processes, edited by Zackay, V.F. (Interscience, 1962), p. 313.Google Scholar