Hostname: page-component-7f64f4797f-p4db6 Total loading time: 0 Render date: 2025-11-04T01:09:10.499Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure and mechanical properties of multiphase NiAl-based alloys

Published online by Cambridge University Press:  31 January 2011

D.R. Panka ,
M.V. Nathal  and
D.A. Koss
D.R. Panka
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802
M.V. Nathal
Affiliation:
NASA Lewis Research Center, Cleveland, Ohio 44135
D.A. Koss
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802
Get access

Abstract

The effect of the γ′ phase on the deformation behavior fracture resistance of melt-spun ribbons and consolidated bulk specimens of a series of NiAl-based alloys with Co and Hf additions has been examined. The morphology, location, and volume fraction of the γ′ phase are significant factors in enhancing the fracture resistance of the normally brittle NiAl-based alloys. In particular, the results indicate that a continuous grain boundary film of γ′ can impart limited room temperature ductility regardless of whether B2 or L10 NiAl is present. Guidelines for microstructure control in multi-phase NiAl-based alloys are also presented.

Information

Type
Articles
Information
Journal of Materials Research , Volume 5 , Issue 5 , May 1990 , pp. 942 - 949
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1Rozner, A. G. and Wasilewski, R. J., J. of Inst. of Metals 94, 169 (1966).Google Scholar
2Pascoe, R.T. and Newey, C.W. A., Met. Sci. 2, 138 (1968).CrossRefGoogle Scholar
3Ball, A. and Smallman, R., Acta Metall. 14, 1349 (1966).CrossRefGoogle Scholar
4Hahn, K. H. and Vedula, K., in High Temperature Ordered Intermetallic Alloys III, edited by Koch, C. C., Liu, C.T., Stoloff, N. S., and Taub, A.I. (MRS, Pittsburgh, PA, 1989), p. 299.Google Scholar
5Gaydosh, D. J., Jech, R.W., and Titran, R. H., J. Mater. Sci. Lett. 4, 138 (1985).CrossRefGoogle Scholar
6Guha, S., Monroe, P., and Baker, I., Scripta Metall. 23, 897 (1989).CrossRefGoogle Scholar
7Russell, K. C. and Edington, J.W., Metal Science Journal. 6, 20 (1972).CrossRefGoogle Scholar
8Inoue, A., Masumoto, T., and Tomioka, H., J. Mater. Sci. 19, 31097 (1984).Google Scholar
9Law, C. C. and Blackburn, M. J., Air Force Report No. AFWALTR-87–4102, 1987.Google Scholar
10Pank, D. R., Nathal, M.V., and Koss, D. A., to be published in High Temperature Ordered Intermetallics III, edited by Koch, C. C., Liu, C.T., Stoloff, N.S., and Taub, A.I. (MRS, Pittsburgh, PA, 1989), p. 561.Google Scholar
11Gaydosh, D. J. and Crimp, M. J., in High Temperature Ordered Intermetallic Alloys III, edited by Koch, C., Liu, C.T., and Stoloff, N. S. (MRS, Pittsburgh, PA, 1985), p. 429.Google Scholar
12Singleton, M. F., Murray, J. L., and Nash, P., in Binary Alloy Phase Diagrams I, edited by Massalski, T. B. (ASM, Metals Park, OH, 1986), p. 12.Google Scholar
13Litvinov, V. S. and Arkhangelskaya, A. A., Phys. Met. Metall. 44, 131 (1978).Google Scholar
14Russell, S. M. and Blackburn, M. J., in High Temperature Ordered Intermetallic Alloys III (Proc. Mater. Res. Soc. Symp.), edited by Liu, C.T., Taub, A.I., Stoloff, N.S., and Koch, C.C. (Materials Research Society, Pittsburgh, PA, 1989), Vol. 133, p. 627.Google Scholar
15Locci, I., NASA Lewis Research Center, Cleveland, OH, 1989 (unpublished research).Google Scholar
16Mishma, Y., Ochiai, S., Yodogawa, M., and Suzuki, T., Trans. Jpn. Inst. of Metals.27, 41 (1986).CrossRefGoogle Scholar
17Schulson, E. M., Baker, I., and Frost, H. J., in High Temperature Ordered Intermetallic Alloys II (Proc. Mater. Res. Soc. Symp.), edited by Stoloff, N. S., Koch, C. C., Liu, C.T., and Izumi, O. (Materials Research Society, Pittsburgh, PA, 1987), Vol. 81, p. 195.Google Scholar
18Enami, K.Martynov, V.V., Tomie, T., Khandros, L.G., and Nenno, S., Trans. Jpn. Inst. of Metals. 22, 357 (1981).CrossRefGoogle Scholar