Hostname: page-component-7dd5485656-zlgnt Total loading time: 0 Render date: 2025-10-31T21:06:51.017Z Has data issue: false hasContentIssue false
  • English
  • Français

Experiments on laminar flow in curved channels of square section

Published online by Cambridge University Press:  29 March 2006

J. A. Baylis
J. A. Baylis
Affiliation:
Central Electricity Research Laboratories, Leatherhead
Get access Rights & Permissions [Opens in a new window]

Abstract

Recently Cheng & Akiyama (1970) published a numerical analysis of laminar flow in curved channels of square and rectangular section. Experimental results are presented here for flow in curved channels of square section. The channels were toroidal in shape, and the flow was driven electromagnetically. Various ratios of the channel dimension d to the channel radius of curvature, R, were used to investigate the dependence of friction factor, f, on the Dean number K, and the Reynolds number, Re. For 5 × 102 < K < 7 × 104 the formula (fRe) = 1·51 K½ was found to fit all the results, although R/d was varied from 17·5 down to the low value of 1·75. At lower values of K the analysis of Cheng & Akiyama was approximately validated.

Information

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 48 , Issue 3 , 16 August 1971 , pp. 417 - 422
Copyright
© 1971 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

Baylis, J. A. 1966 Fully developed secondary flow on magnetohydrodynamics. Ph.D. Thesis, University of Cambridge.
Baylis, J. A. & Hunt, J. C. R. 1971 MHD flow in an annular channel; theory and experiment J. Fluid Mech. 48, 423–428.Google Scholar
Cheng, K. C. & Akiyama, M. 1970 Laminar forced convection heat transfer in curved rectangular channels Int. J. Heat Mass Transfer, 13, 471–490.Google Scholar
Cornish, R. J. 1928 Proc. Roy. Soc. A, 120, 691.
Hunt, J. C. R. & Stewartson, K. 1965 Magnetohydrodynamic flow in rectangular ducts. II J. Fluid Mech. 23, 563–581.Google Scholar
Ito, H. 1969 Laminar flow in curved pipes Z. angew. Math Mech. 49, 653–663.Google Scholar
Ludwieg, H. 1951 Die ausgebildete Kanalströmung in einem rotierenden System Ingenieur-Archiv, 19, 296–308.Google Scholar
Mori, Y. & Uchida, Y. 1967 Study on forced convective heat transfer in curved square channel (1st report. Theory of laminar region) Trans. Japan Soc. Mech. Engrs. 33, 1836–1846.Google Scholar
Schmidt, E. F. 1967 Chem. Ing. Tech. 39, 781–789.