Hostname: page-component-784d4fb959-g549k Total loading time: 0 Render date: 2025-07-16T23:27:20.181Z Has data issue: false hasContentIssue false
  • English
  • Français

Frequency-reconfigurable microstrip filter with dual-mode resonators using RF PIN diodes and DGS

Published online by Cambridge University Press:  27 August 2014

Hesham A. Mohamed ,
Heba B. El-Shaarawy ,
Esmat A.F. Abdallah  and
Hadia M. El-Hennawy
Hesham A. Mohamed*
Affiliation:
Microstrip Department, Electronics Research Institute, Cairo, Egypt. Phone: +202 01229880280
Heba B. El-Shaarawy
Affiliation:
Electronics and Communication Engineering Department, Faculty of Engineering, Cairo University, Giza, Egypt
Esmat A.F. Abdallah
Affiliation:
Microstrip Department, Electronics Research Institute, Cairo, Egypt. Phone: +202 01229880280
Hadia M. El-Hennawy
Affiliation:
Electronics and Communications Department, Faculty of Engineering, Ain Shams University, Cairo, Egypt
*
Corresponding author: H.A. Mohamed Email: hesham_280@yahoo.com
Get access Rights & Permissions [Opens in a new window]

Abstract

This work presents a novel frequency miniaturized reconfigurable dual-mode stub-loaded resonator switchable from bandpass filter to single/double-notched bandnotch filter. The proposed filter topology employs RF PIN diodes as the switching device. Based on the odd- and even-mode equivalent circuits, the resonant characteristics of the proposed microstrip resonator are investigated. The defected ground structure pattern enhanced the performance; the 3-dB bandwidth reached 63%, with insertion loss of −0.5 dB. There was great sharpness of 55 dB in the low-frequency edge (from 1.7982 to 1.8466 GHz) and 33 dB in the high-frequency edge (from 3.4329 to 3.4995 GHz). The frequency-reconfigurable microstrip filter has been designed, fabricated, and measured for application in narrow band and ultra-wideband.

Keywords

FiltersCircuit design and applications

Information

Type
Research Paper
Information
International Journal of Microwave and Wireless Technologies , Volume 7 , Issue 6 , December 2015 , pp. 661 - 669
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

[1]Hong, J.-S.: Reconfigurable planar filters. IEEE Microw. Mag., 10 (6) (2009), 73–83.Google Scholar
[2]Miller, A.; Hong, J.: Wideband bandpass filter with reconfigurable bandwidth. IEEE Microw. Wirel. Compon. Lett., 20 (1) (2010), 28–30.Google Scholar
[3]Zhang, H.; Chen, K.: A microstrip bandpass filter with an electronically reconfigurable transmission zero. European Microwave Conf., 9–12 September 2006, 653–656.Google Scholar
[4]Hesham, A.; Heba, B.; Abdallah, E.; Hadi, E.: Design of reconfigurable miniaturized UWB-BPF with tuned notched band. Prog. Electromagn. Res. B, 24 (2013), 97–109.Google Scholar
[5]Zhang, H.; Chen, K.J.: Bandpass filters with reconfigurable transmission zeros using varactor-tuned tapped stubs. IEEE Microw. Wirel. Compon. Lett., 16 (5) (2006), 249–251.Google Scholar
[6]Hua, C.; Chen, C.; Miao, C.: Dual-mode bandpass filter using internally coupled stub-loaded resonators. Microw. Opt. Tech. Lett., 53 (3) (2011), 643–646.Google Scholar
[7]Mohamed, H.; El-Shaarawy, H.; Abdualla, E.; El-Henawy, H.: Compact dual mode switchable BPF – BSF using RF PIN diodes and DGS. IEEE Asia Pacific Microwave Conf. (APMC 2009), APMC, Coex in Seoul, Korea, 5–8 November 2013, 945–947.Google Scholar
[8]Matsuo, M.; Yabuki, H.; Makimoto, M.: Dual-mode stepped- impedance ring resonator for bandpass filter applications, IEEE Trans. Microw. Theory Tech., 49 (7) (2001), 1235–1240.Google Scholar
[9]Song, K.; Quan, X.: Novel broadband bandpass filters using Y-shaped dual-mode microstrip resonators. IEEE Microw. Wirel. Compon. Lett., 19 (9) (2009), 548–550.Google Scholar
[10]Apisak, W.; Kunthphong, S.; Wanlop, S.: Stepped-impedance coupled resonators for implementation of parallel coupled microstrip filters with spurious band suppression. IEEE Trans. Microw. Theory Tech., 60 (6) (2012), 1540–1548.Google Scholar
[11]Pozar, D.M.: Microwave Engineering, 4th ed., John Wiley & Sons, Inc., New York, USA, 2012.Google Scholar
[12]RF PIN diode Switch (HPND 4005), manufactured by Avago Technologies, United States. (http://www.avagotech.com/cs/satellite)Google Scholar
[13]Xue, S.J.; Feng, W.J.; Che, W.Q.: Microstrip wideband bandpass filter with six transmission zeros using transversal signal interaction concepts. Prog. Electromagn. Res. C, 34 (2013), 1–12.CrossRefGoogle Scholar
[14]Karshenas, F.; Mohassel, J.: Size reduction and harmonic suppression of parallel coupled-line bandpass filters using defected ground structure. 13th Int. Symp. Antenna Technology and Applied Electromagnetics and the Canadian Radio Sciences Meeting, 2009.Google Scholar