Hostname: page-component-cb9f654ff-9b74x Total loading time: 0 Render date: 2025-08-22T14:00:37.424Z Has data issue: false hasContentIssue false
  • English
  • Français

A Fixture for Testing Sheet Materials in Compression at Elevated Temperatures

Published online by Cambridge University Press:  28 July 2016

D. C. Hayward
D. C. Hayward*
Affiliation:
Metallurgy Department, Royal Aircraft Establishment
Get access Rights & Permissions [Opens in a new window]

Summary

Supersonic speeds of flight have brought thermal problems due to the kinetic heating of skin materials. These materials, generally metallic, suffer loss of strength and stiffness with increase in temperature and a knowledge of changes in value of these properties at elevated temperatures is a pre-requisite to a design study. More particularly for stress offices the compressive stress-strain curves are required from which are derived tangent- and secant-moduli used to predict buckling in components. A fixture has therefore been developed for testing under edgewise compression sheet materials up to temperatures of 400 °C.

Information

Type
Research Article
Information
The Aeronautical Journal , Volume 60 , Issue 550 , October 1956 , pp. 669 - 674
Copyright
Copyright © Royal Aeronautical Society 1956

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Aitchinson, C. S. and Tuckerman, L. B. (1939). The “ Pack ” Method for Compressive Tests in Thin Specimens of Materials Used in Thin-Walled Structures. N.A.C.A. Report No. 649, 1939.Google Scholar
2. Millar, J. A. (1946). A Fixture for Compressive Tests on Thin Sheet Metal Between Lubricated Steel Guides. N.A.C.A. T.N. No. 1022, 1946.Google Scholar
3. Rondeel, J. H. and Duyn, G. C. (1950). A “ Solid Guide Fixture ” for Determining the Properties of Thin Sheet Material in Compression. National Luchtvaartlaboratorium, Amsterdam. Report S. 368, 1950.Google Scholar
4. Paul, D. A., Howell, F. M. and Grieshaber, H. E. (1941). Comparison of Stress-Strain Curves Obtained by Single Thickness and Pack Methods. N.A.C.A. T.N. No. 819, 1941.Google Scholar
5. Flanigan, A. E., Tedsen, L. E. and Dorn, J. E. (1946). Compressive Properties of Aluminium Alloy Sheet at Elevated Temperatures. American Society for Testing Materials Proceedings, Vol. 46, p. 1039, 1946.Google Scholar
6. Nadai, A. (1931). Plasticity, p. 255. McGraw-Hill Book Co., New York and London, 1931.Google Scholar
7.British Standard Specification 1094 : 1943. Short-Time Testing of Light Alloys at Elevated Temperature.Google Scholar