We present an experimental study of proton acceleration driven by femtosecond multi-PW lasers of three different prepulse parameters with the peak laser intensity of 1.2 × 1021 W/cm2 irradiating micrometre-thick metal foils. For 4-μm-thick copper foils, the highest-energy proton beam of 58.9 MeV is generated with the moderate-contrast laser, while the low-contrast or high-contrast lasers result in the lower proton cutoff energies. The one-dimensional hydrodynamic and two-dimensional particle-in-cell simulations indicate that the front preplasma of foils induced by the laser prepulse can enhance electron acceleration and in turn improve proton acceleration, while the rear preplasma will weaken the sheath field and be unfavourable for accelerating ions. For the case of the moderate contrast, the scale length of the front preplasma is long enough to generate high-temperature electrons compared to the high-contrast case, and the scale length of the rear preplasma is so short that the sheath field still remains strong compared with the low-contrast case, which is advantageous for generating high-energy protons. Meanwhile, a concrete map is theoretically given for accelerating higher-energy protons. This work extends the concept of the prepulse effect on target normal sheath acceleration (TNSA) to a wider range of laser parameters (multi-PW, 1021 W/cm2), representing an important step towards potential applications of TNSA-driven proton sources, especially considering that PW and even 10 PW laser facilities exist all around the world.

This study uses a coupled lattice Boltzmann and discrete element method to perform interface-resolved simulations of turbulent channel flow laden with finite-size cylindrical particles. The aim is to investigate interactions between wall-bounded turbulence and non-spherical particles with sharp edges. The particle-to-fluid density ratio is unity and gravity is neglected. Comparative analyses are conducted among long (length-to-diameter aspect ratio 2), unit (1) and short ($ 1/2 $) cylinders, along with spheres and literature data for spheroids. Results reveal both shared and distinct dynamic behaviours of cylinders and their effects on turbulence modulation. Notably, disk-like short cylinders can remain trapped near the wall due to their flat faces aligning closely with it – a behaviour unique to particles with sharp edges. Long and unit cylinders, as well as spheres, preferentially accumulate in high-speed streaks, while short cylinders cluster in low-speed streaks, demonstrating a strong aspect-ratio effect. Near the wall, long cylinders align their axis with the streamwise direction, while short cylinders orient perpendicular to the wall. Rotationally, long cylinders primarily spin, whereas short ones predominantly tumble. These trends arise from orientation preferences and differences in axial and spanwise moments of inertia. Cylindrical particles increase wall drag compared with the single-phase case, with short cylinders causing the greatest enhancement due to strong near-wall accumulation. Overall, the influence of aspect ratio on particle dynamics and turbulence modulation is more pronounced for cylindrical particles than for spheroidal ones.

An experimental study of the equation of state for metallic powders under impact loading was carried out at a high-energy laser facility. A laser-ablatable micro-target was obtained to satisfy the laser equation of state for experimental study, and the precise characterization of the initial density was realized. The technique boosts the pressure of copper powder to 1400 GPa. The data consistency can effectively distinguish the data trends under different initial densities (~4.05 and 4.50 g/cm3). Experimental data can effectively distinguish the differences between the high-pressure Thomas–Fermi model and the Thomas–Fermi–Kirzhnits model, providing strong support for the WEOS-Pα model of the Institute of Applied Physics and Computational Mathematics, which is more in line with the actual state description of the material. This experimental technique can be extended to study the high-pressure physical properties of other powder particles.

This meta-analysis assesses the relationship between vitamin D supplementation and incidence of major adverse cardiovascular events (MACE). PubMed, Web of science, Ovid, Cochrane Library and Clinical Trials were used to systematically search from their inception until July 2024. Hazard ratios (HR) and 95 % CI were employed to assess the association between vitamin D supplementation and MACE. This analysis included five randomised controlled trials (RCT). Pooled results showed no significant difference in the incidence of MACE (HR: 0·96; P = 0·77) and expanded MACE (HR: 0·96; P = 0·77) between the vitamin D intervention group and the control group. Further, the vitamin D intervention group had a lower incidence of myocardial infarction (MI), but the difference was not statistically significant (HR: 0·88, 95 % CI: 0·77, 1·01; P = 0·061); nevertheless, vitamin D supplementation had no effect on the reduced incidence of stroke (P = 0·675) or cardiovascular death (P = 0·422). Among males (P = 0·109) and females (P = 0·468), vitamin D supplementation had no effect on the reduced incidence of MACE. For participants with a BMI < 25 kg/m2, the difference was not statistically significant (P = 0·782); notably, the vitamin D intervention group had a lower incidence of MACE for those with BMI ≥ 25 kg/m2 (HR: 0·91, 95 % CI: 0·83, 1·00; P = 0·055). Vitamin D supplementation did not significantly contribute to the risk reduction of MACE, stroke and cardiovascular death in the general population, but may be helpful for MI. Notably, the effect of vitamin D supplementation for MACE was influenced by BMI. Overweight/obese people should be advised to take vitamin D to reduce the incidence of MACE.

While there is evidence that childhood maltreatment (CM) is positively associated with drug use (DU), the strength and difference of the association between CM and its subtypes (hereafter CM + ST) and DU remains to be further explored. A multilevel meta-analysis was conducted on 101 independent studies reporting 333 effect sizes (N = 132,341; Mage = 24.65; 43.80%males). Results showed significantly positive correlations between CM + ST and DU (range from 0.109 to 0.185). The results of the subgroup analysis revealed notable disparities in the correlations between distinct CM subtypes and DU (F = 5.358, P<0.01). Specifically, the effect size for childhood sexual abuse (CSA) was significantly lower than childhood emotional maltreatment (CEM) and childhood physical maltreatment (CPM), while no significant difference was noted between the CEM and CPM groups. These effect sizes also varied across regions, drug types, gender, detection rate of CM, the presence or absence of alcohol in substances, publication status and measurement method. The significant yet differing correlations between different subtypes of CM and DU to some extent support the principle of equality in psychopathology. These findings help explain the relationship between CM + ST and DU laying the groundwork for further research into the intricate and complex associations between CM and DU.

Hydrogen sulfide (H2S) has been shown to play a significant role in oxidative stress across various tissues and cells; however, its role in sperm function remains poorly understood. This study aimed to investigate the protective effect of GYY4137, a slow-releasing H2S compound, on sperm damage induced by H2O2. We assessed the effects of GYY4137 on motility, viability, lipid peroxidation and caspase-3 activity in human spermatozoa in vitro following oxidative damage mediated by H2O2. Spermatozoa from 25 healthy men were selected using a density gradient centrifugation method and cultured in the presence or absence of 10 μM H2O2, followed by incubation with varying concentrations of GYY4137 (0.625–2.5 μM). After 24 h of incubation, sperm motility, viability, lipid peroxidation, and caspase-3 activity were evaluated. The results indicated that H2O2 adversely affected sperm parameters, reducing motility and viability, while increasing oxidative stress, as evidenced by elevated lipid peroxidation and caspase-3 activity. GYY4137 provided dose-dependent protection against H2O2-induced oxidative stress (OS). We concluded that supplementation with GYY4137 may offer antioxidant protection during in vitro sperm preparation for assisted reproductive technology.

The shock wave accelerating a heavy fluid layer can induce reverberating waves that continuously interact with the first and second interfaces. In order to manipulate the perturbation growths at fluid-layer interfaces, we present a theoretical framework to eliminate the reverberating waves. A model is established to predict the individual freeze-out (i.e. stagnation of perturbation growth) for the first and second interfaces under specific flow conditions determined based on the shock dynamics theory. The theoretical model quantifies the controllable parameters required for freeze-out, including the initial amplitudes of the first and second interfaces, the interface coupling strength and the maximum initial layer thickness preventing the second interface's phase reversal. The effectiveness of the model in predicting individual freeze-out for the first and second interfaces is validated numerically over a wide range of initial conditions. The upper and lower limits of initial amplitudes for the freeze-out of the whole fluid-layer width growth are further predicted. Within this amplitude range, a slightly higher initial amplitude for the second interface is specified, effectively arresting the growth of the entire fluid-layer width before the phase reversal of the second interface.

The impact of a liquid droplet with another droplet or onto a solid surface are important basic processes that occur in many applications such as agricultural sprays and inkjet printing, and in nature such as pathogens transport by raindrops. We investigated the head-on collision of unequal-size droplets of the same liquid on wetting surfaces using the direct numerical simulations technique at different size ratios. The unsteady Navier–Stokes equations are solved and the liquid–gas interface is tracked using the geometric volume-of-fluid method. The numerical model is validated by comparing simulation results of two extreme cases of droplets bouncing with the experimental data from previous studies and the agreement is quite accurate. The validated model is employed to simulate droplets bouncing at several size ratios at different Weber numbers and Ohnesorge number. Two distinct regimes are identified, namely, the inertial regime, where the restitution coefficient is a constant value close to 0.3, the viscous regime, where the restitution coefficient declines. To understand the bouncing behaviour, the velocity field is analysed and an energy budget calculation is performed. The distribution of the sessile droplet energy is found to be important and the sessile droplet surface energy is calculated by its deformation characteristics such as crater depth. Finally, a scaling analysis is performed to rationalize the insensitivity of the coefficient of restitution in the inertial regime, and its decline in the viscous regime, at large size ratios.

This study presents novel findings on stochastic electron heating via a random electron cyclotron wave (ECW) in a spherical tokamak. Hard x ray measurements demonstrate the time evolution of hard x ray counts at different energy bands, consistent with predictions from the stochastic heating model. The ECW heating rate shows a positive correlation with applied power, confirming the effectiveness of stochastic heating. Remarkably, the ECW-driven plasma current remains insensitive to ECW incidence angle, consistent with model predictions. The observed stochastic heating of electrons offers potential for exploring innovative non-inductive current drive modes in spherical tokamaks. This research contributes to the understanding of plasma behaviour and motivates the development of new models for non-inductive current drive in fusion devices.

This paper studies the synchronization control of the blanket remote maintenance robot (BRMR) of the China fusion engineering test reactor (CFETR). First, the general state space mathematical model of BRMR was established by using a physical-based method. Second, based on the receding horizon optimization of model predictive control (MPC) and cross-coupling error reduction in cross-coupling control (CCC), the innovative MPC-CCC controller was proposed to realize the single-system and multisystem error convergence and high accuracy transportation of blanket through the high accuracy synchronization control of BRMR. Third, to verify the control effectiveness of the MPC-CCC controller, two types of simulations and experiments were implied compared with the original proportional-integral (PI) controller in Mover. Results showed that simulation and experiments were highly consistent. It is found that the use of an MPC-CCC controller can result in up to a 70% reduction in displacement error and up to a 59% reduction in synchronization error compared to the PI controller. And the accuracy of the MPC-CCC controller satisfies the real requirement of the maintenance process of the blanket. This work provides the theoretical basis and practical experience for the highly stable, safe, and efficient maintenance of blankets in the future.

The discharged capillary plasma channel has been extensively studied as a high-gradient particle acceleration and transmission medium. A novel measurement method of plasma channel density profiles has been employed, where the role of plasma channels guiding the advantages of lasers has shown strong appeal. Here, we have studied the high-order transverse plasma density profile distribution using a channel-guided laser, and made detailed measurements of its evolution under various parameters. The paraxial wave equation in a plasma channel with high-order density profile components is analyzed, and the approximate propagation process based on the Gaussian profile laser is obtained on this basis, which agrees well with the simulation under phase conditions. In the experiments, by measuring the integrated transverse laser intensities at the outlet of the channels, the radial quartic density profiles of the plasma channels have been obtained. By precisely synchronizing the detection laser pulses and the plasma channels at various moments, the reconstructed density profile shows an evolution from the radial quartic profile to the quasi-parabolic profile, and the high-order component is indicated as an exponential decline tendency over time. Factors affecting the evolution rate were investigated by varying the incentive source and capillary parameters. It can be found that the discharge voltages and currents are positive factors quickening the evolution, while the electron-ion heating, capillary radii and pressures are negative ones. One plausible explanation is that quartic profile contributions may be linked to plasma heating. This work helps one to understand the mechanisms of the formation, the evolutions of the guiding channel electron-density profiles and their dependences on the external controllable parameters. It provides support and reflection for physical research on discharged capillary plasma and optimizing plasma channels in various applications.

A new isolated out-of-phase filtering power divider/combiner with high selectivity is presented. Based on a single-layer microstrip, required coupling strength and phase difference are achieved by two pairs of three-line coupled feeding structures. To realize desired bandpass responses, a specific resonator is located between the input and output coupled structures. By connecting a half-wavelength transmission line which is centrally loaded with a grounded resistor between two output ports, high port-to-port isolation is attained. Based on the impedance matrix of coupled three-line structure, theoretical filtering responses are predicted with the specified bandwidth and return loss. For demonstration, a prototype is designed, fabricated, and tested. Both simulated and measured results are displayed to verify the design mechanism.

A clear understanding of the solid-state reaction of kaolinite (Kln), quartz (Qtz), and sodium carbonate (Na2CO3) is of great significance for the process optimization of coal gangue calcined with Na2CO3. In this work, a comparative study of the isothermal solid-state reaction systems of Kln–Na2CO3 and Kln–Qtz–Na2CO3 was performed by means of X-ray diffraction (XRD), scanning electron microscope, and energy dispersion spectroscopy (SEM-EDS). The results showed that the calcined products both for these reaction systems mainly contain different kinds of sodium aluminum silicates (e.g., NaAlSiO4, Na1.55Al1.55Si0.45O4, and Na1.95Al1.95Si0.05O4) and various kinds of sodium silicates (e.g., Na2Si3O7, Na2SiO3, and Na6Si2O7). The mass percentage of Na2CO3 played a key role in the phase transformation, determining the Na/Al/Si molar ratio of the formed sodium aluminum silicates. Compared with the reaction system of Kln–Na2CO3, the existence of Qtz inhibited the formation of sodium aluminum silicates in the reaction system of Kln–Qtz–Na2CO3. It should be noted that the formed phases both for these reaction systems were slightly different from that of the thermodynamical calculated results of Na2O–SiO2–Al2O3 using FactSage™ software. According to both the experimental and calculated results, a reasonable batching area for coal gangue activation was proposed that the addition of Na2CO3 should be in the range of 20–50% of the total mass of Kln, Qtz, and Na2CO3.