The current study aimed to investigate the effects of different iron sources on growth performance and small intestinal health in weaned piglets. Two hundred and forty piglets (Duroc × Large White × Landrace, 9.52 ± 1.60 kg, 40 ± 2 d) were assigned to four treatments including control group, a basal diet without iron supplemented in mineral premix; ferrous sulfate (FeSO4) group, 100 mg Fe/kg dry matter (DM); ferrous glycinate (Fe-Gly) group, 80 mg Fe/kg DM; amino acid-Fe(II)-chelator complexes group, 30 mg Fe/kg DM. There were four pens for each treatment, and each pen had fifteen piglets. The experiment lasted for 28 days. Compared to the control group, three iron sources increased average daily feed intake (P < 0.05). Fe-Gly and amino acid-Fe(II)-chelator complexes increased average daily gain (P < 0.05). Amino acid-Fe(II)-chelator complexes increased villus height in jejunum (P < 0.05). In addition, Fe-Gly increased Ki67 and leucine rich repeat containing G protein-coupled receptor 5 (Lgr5) mRNA expression in duodenum (P < 0.05). Amino acid-Fe(II)-chelator complexes increased claudin-1 mRNA expression, and both amino acid-Fe(II)-chelator complexes and Fe-Gly increased Lgr5 mRNA expression (P < 0.05) in jejunum. These results suggest that organic iron is more effective than FeSO4 in improving growth performance, and has a positive effect on intestinal health in weanling piglets.

This paper provides an overview of the current status of ultrafast and ultra-intense lasers with peak powers exceeding 100 TW and examines the research activities in high-energy-density physics within China. Currently, 10 high-intensity lasers with powers over 100 TW are operational, and about 10 additional lasers are being constructed at various institutes and universities. These facilities operate either independently or are combined with one another, thereby offering substantial support for both Chinese and international research and development efforts in high-energy-density physics.

Biped wall-climbing robots (BWCRs) serve as viable alternatives to human workers for inspection and maintenance tasks within three-dimensional (3D) curtain wall environments. However, autonomous climbing in such environments presents significant challenges, particularly related to localization and navigation. This paper presents a pioneering navigation framework tailored for BWCRs to navigate through 3D curtain wall environments. The framework comprises three essential stages: Building Information Model (BIM)-based map extraction, 3D climbing path planning (based on our previous work), and path tracking. An algorithm is developed to extract a detailed 3D map from the BIM, including structural elements such as walls, frames, and ArUco markers. This generated map is input into a proposed path planner to compute a viable climbing motion. For path tracking during actual climbing, an ArUco marker-based global localization method is introduced to estimate the pose of the robot, enabling adjustments to the target foothold by comparing desired and actual poses. The conducted experiments validate the feasibility and efficacy of the proposed navigation framework and associated algorithms, aiming to enhance the autonomous climbing capability of BWCRs.

The maser instability associated with the loss-cone distribution has been widely invoked to explain the radio bursts observed in the astrophysical plasma environment, such as aurora and corona. In the laboratory plasma of a tokamak, events reminiscent of these radio bursts have also been frequently observed as an electron cyclotron emission (ECE) burst in the microwave range ($\mathrm{\sim }2{f_{\textrm{ce}}}$ near the last closed flux surface) during transient magnetohydrodynamic events. These bursts have a short duration of ~10 μs and display a radiation spectrum corresponding to a radiation temperature ${T_{e,\textrm{rad}}}$ of over $30\ \textrm{keV}$ while the edge thermal electron temperature ${T_e}$ is only in the range of $1\ \textrm{keV}$. Suprathermal electrons can be generated through magnetic reconnection, and a loss-cone distribution can be generated through open stochastic field lines in the magnetic mirror of the near-edge region of a tokamak plasma. Radiation modelling shows that a sharp distribution gradient $\partial f/\partial {v_ \bot } > 0$ at the loss-cone boundary can cause a negative absorption of ECE radiation through the maser instability. The negative absorption then amplifies the radiation so that the microwave intensity is significantly stronger than the thermal value. The significant ${T_{e,\textrm{rad}}}$ from the simulations suggests the potential role of the loss-cone maser instability in generating the ECE burst in a tokamak.

Significant links exist between one’s perception of available social support and mental health outcomes, including during the transition to motherhood. Yet, attachment theory posits that individuals do not benefit equally from social support. As such, we examined the influence of attachment representations (i.e., secure base script knowledge) as they potentially moderate links between social support and psychological distress in a 1-year longitudinal study of an ethnically diverse (56% White) sample of infant-mother dyads. We hypothesized that higher social support would predict lower maternal psychological distress and this relation would be strongest in those with higher secure base script knowledge. Results indicated that maternal perceptions of social support were significantly negatively correlated with psychological distress. Analyses revealed that secure base script scores significantly moderated these associations. Interestingly, for those high in script knowledge, low social support predicted greater psychological distress. For those low in script knowledge, social support was unrelated to psychological distress. This pattern suggested that those who expect care (i.e., high secure base script knowledge) but receive minimal support (i.e., low perceived social support) find motherhood uniquely dysregulating. Practitioners may do well to examine individuals’ attachment expectations in relation to their current social support.

Accurately predicting neurosyphilis prior to a lumbar puncture (LP) is critical for the prompt management of neurosyphilis. However, a valid and reliable model for this purpose is still lacking. This study aimed to develop a nomogram for the accurate identification of neurosyphilis in patients with syphilis. The training cohort included 9,504 syphilis patients who underwent initial neurosyphilis evaluation between 2009 and 2020, while the validation cohort comprised 526 patients whose data were prospectively collected from January 2021 to September 2021. Neurosyphilis was observed in 35.8% (3,400/9,504) of the training cohort and 37.6% (198/526) of the validation cohort. The nomogram incorporated factors such as age, male gender, neurological and psychiatric symptoms, serum RPR, a mucous plaque of the larynx and nose, a history of other STD infections, and co-diabetes. The model exhibited good performance with concordance indexes of 0.84 (95% CI, 0.83–0.85) and 0.82 (95% CI, 0.78–0.86) in the training and validation cohorts, respectively, along with well-fitted calibration curves. This study developed a precise nomogram to predict neurosyphilis risk in syphilis patients, with potential implications for early detection prior to an LP.

Supported silver nanoparticles (Ag NPs) have been used extensively as antibacterial agents in biomedicine, biotechnology, and environmental remediation. However, a facile and scalable method for preparing Ag NPs dispersed homogeneously on supports remains a challenge. In this study, a novel molten salt method was developed successfully to synthesize the supported, homogeneously dispersed Ag NPs on palygorskite. Abundant pores and ample surface hydroxyl groups of palygorskite served as anchoring sites, preventing the rapid growth, aggregation, and sintering of Ag NPs. Typically, palygorskite was mixed with AgNO3 (as a precursor) and NaNO3 (as a dispersant), and then the mixture was heated slowly. During the heating process, the AgNO3 decomposed gradually into Ag NPs and the molten NaNO3 with a high concentration of ions dispersed the newly formed Ag NPs. The Ag NPs were dispersed homogeneously on the palygorskite and had very small particle sizes (~5.8 nm) even for a significant loading amount (~9 wt.%). As antibacterial agents, the Ag/palygorskite nanocomposites showed enhanced antibacterial activity, compared with those synthesized without the introduction of molten NaNO3. In addition, the key effect of the surface hydroxyl groups of palygorskite on the characteristics of the loaded Ag and the corresponding antibacterial activity were also elucidated. As such, the present work provided a novel and facile strategy for the synthesis, without a chemical reductant or surfactant, of supported, highly dispersed Ag NPs on clay minerals and this could have potential in the scalable production and practical application of Ag-based antibacterial materials.

In order to establish a compact all-optical Thomson scattering source, experimental studies were conducted on the 45 TW Ti: sapphire laser facility. By including a steel wafer, mixed gas, and plasma mirror into a double-exit jet, several mechanisms, such as shock-assisted ionization injection, ionization injection, and driving laser reflection, were integrated into one source. So, the source of complexity was remarkably reduced. Electron bunches with central energy fluctuating from 90 to 160 MeV can be produced. Plasma mirrors were used to reflect the driving laser. The scattering of the reflected laser on the electron bunches led to the generation of X-ray photons. Through comparing the X-ray spots under different experimental conditions, it is confirmed that the X-ray photons are generated by Thomson scattering. For further application, the energy spectra and source size of the Thomson scattering source were measured. The unfolded spectrum contains a large amount of low-energy photons besides a peak near 67 keV. Through importing the electron energy spectrum into the Monte Carlo simulation code, the different contributions of the photons with small and large emitting angles can be used to explain the origin of the unfolded spectrum. The maximum photon energy extended to about 500 keV. The total photon production was 107/pulse. The FWHM source size was about 12 μm.

Aerospace represents the development of national science and technology. It is an important foundation for exploring space and an important guarantee for the construction of aerospace power. There are many large workpieces in the aerospace field. The box insulation layer of large workpieces is an important processing problem. A new thick processing equipment is proposed to process the box insulation layer of large workpieces. The thick processing equipment consists of the XYZ shaft long guide rail and five degrees of freedom (5-DOF) RAPA. The mechanical structure of the 5-DOF RAPA is a redundantly actuated parallel mechanism (RAPM). Meanwhile, this paper proposes a new method to design 5-DOF redundantly actuated parallel mechanisms (RAPMs) with large output rotational angles. Based on configuration evolution and Li group, two articulated moving platforms (AMPs) and four kinds of limbs are designed, and a series of 3T2R (T represents translation, R represents rotation) RAPMs and 2T3R RAPMs are synthesized. To verify the designed RAPMs with large angle, an example of RAPMs, 4UPS-{2UPR}-R is analyzed. To ensure that the RAPM has no mechanism vibration impact in movement, this paper represents the RAPM adopts a newly proposed trajectory planning method. The results show that the 4SPU-(2UPR)R mechanism possesses large angles and verifies the efficiency of the new proposed trajectory planning method in simplified trajectories. This work lays the foundation for processing the box insulation layer of large workpieces with straight lines and arcs paths.

This paper presents a gait optimization method to generate the locomotion pattern for biped and discuss its stability. The main contribution of this paper is a newly proposed energy-based stability criterion, which permits the dynamic stable walking and could be straight-forwardly generalized to different locomotion scenarios and biped robots. The gait optimization problem is formulated subject to the constraints of the whole-body dynamics and kinematics. The constraints are established based on the modelling of bipedal hybrid dynamical systems. Following the whole-body modelling, the system energy is acquired and then applied to create the stability criterion. The optimization objective is also established on the system energy. The gait optimization is solved by being converted to a large-scale programming problem, where the transcription accuracy is improved via the spectral method. To further reduce the dimensionality of the large-scale problem, the whole-body dynamics is re-constructed. The generalization of the optimized gait is improved by the design of feedback control. The optimization examples demonstrate that the stability criterion naturally leads to a cyclic biped locomotion, though the periodicity was not previously imposed. Two simulation cases, level ground walking and slope walking, verify the generalization of the stability criterion and feedback control. The stability analyses are carried out by investigating the motions of centre of gravity and centre of pressure. It is revealed that if the tracked speed is above 0.3 m/s or the biped accelerates/climbs the slope, the stability criterion accomplishes the dynamic stable walking, where zero moment point criterion is not strictly complied.

Biomarkers may be useful endophenotypes for genetic studies if they share genetic sources of variation with the outcome, for example, with all-cause mortality. Australian adult study participants who had reported their parental survival information were included in the study: 14,169 participants had polygenic risk scores (PRS) from genotyping and up to 13,365 had biomarker results. We assessed associations between participants’ biomarker results and parental survival, and between biomarker results and eight parental survival PRS at varying p-value cut-offs. Survival in parents was associated with participants’ serum bilirubin, C-reactive protein, HDL cholesterol, triglycerides and uric acid, and with LDL cholesterol for participants’ fathers but not for their mothers. PRS for all-cause mortality were associated with liver function tests (alkaline phosphatase, butyrylcholinesterase, gamma-glutamyl transferase), metabolic tests (LDL and HDL cholesterol, triglycerides, uric acid), and acute-phase reactants (C-reactive protein, globulins). Association between offspring biomarker results and parental survival demonstrates the existence of familial effects common to both, while associations between biomarker results and PRS for mortality favor at least a partial genetic cause of this covariation. Identification of genetic loci affecting mortality-associated biomarkers offers a route to the identification of additional loci affecting mortality.

The effects of a wavy wall on the stability of a hypersonic boundary layer on a flared cone are investigated by detailed experimental measurements and direct numerical simulations. The non-contact optical measurement method of focused laser differential interferometry is used to measure the disturbance development within the wavy region. The measurement results show that the second mode for the wavy wall is suppressed significantly compared with the smooth wall, and that multiple disturbances at low frequencies appear within the wavy region. Numerical corroboration against experimental measurements reveals good quantitative agreement. It is found that the disturbances at $f=360$ kHz on the wavy wall are suppressed appreciably, which are very significant on the smooth wall. And the disturbances at $f=140$ kHz and $f=260$ kHz develop within the wavy region, and increase considerably. Also, the disturbances achieve a significant increase over the first half of a wavy trough and become more stable over the second half of a wavy trough. The physical mechanism is found to be due to the change in wall geometry and is attributed to the spatially modulated mean flow. The disturbance growth rate is closely related to the level of the mean-flow distortion.

A short-term 2-week (2w) and long-term 8-week (8w) feeding trial was conducted to investigate the effects of low-starch (LS) and high-starch (HS) diets on the growth performance, metabolism and liver health of largemouth bass (Micropterus salmoides). Two isonitrogenous and isolipidic diets containing two levels of starch (LS, 9·06 %; HS, 13·56 %) were fed to largemouth bass. The results indicated that HS diet had no significant effects on specific growth rate during 2w, whereas significantly lowered specific growth rate at 8w. HS diet significantly increased hepatic glycolysis and gluconeogenesis at postprandial 24 h in 2w. The hepatosomatic index, plasma alkaline phosphatase, total bile acid (TBA) levels, and hepatic glycogen, TAG, total cholesterol, TBA, and NEFA contents were significantly increased in the HS group at 2w. Moreover, HS diet up-regulated fatty acid and TAG synthesis-related genes and down-regulated TAG hydrolysis and β-oxidation-related genes. Therefore, the glucolipid metabolism disorders resulted in metabolic liver disease induced by HS diet at 2w. However, the up-regulation of bile acid synthesis, inflammation and energy metabolism-related genes in 2w indicated that largemouth bass was still in a state of ‘self-repair’ response. Interestingly, all the metabolic parameters were returned to homoeostasis, with up-regulation of intestinal glucose uptake and transport-related genes, even hepatic histopathological analysis showed no obvious abnormality in the HS group in 8w. In conclusion, HS feed induced short-term acute metabolic disorder, but long-term metabolic adaptation to HS diet was related to repairing metabolism disorders via improving inflammatory responses, bile acid synthesis and energy metabolism. These results strongly indicated that the largemouth bass owned certain adaptability to HS diet.

The evolution of an instability in a transitional hypersonic boundary layer and its effects on aerodynamic cooling are investigated over 260-mm-long flared cone models with smooth and porous surfaces. Experiments are conducted in a Mach 6 wind tunnel using Rayleigh-scattering flow visualization, fast-response pressure sensors and an infrared camera. Calculations are performed based on both direct numerical simulations (DNS) and linear stability theory (LST). The unit Reynolds number is $9.7 \times 10^6\ \textrm {m}^{-1}$. It is confirmed that a cooled region appears downstream of the local heat peak as the second-mode instability evolves over the smooth-surface model, as found in other studies. Comparisons between the DNS and LST results show that the nonlinear interaction of the second mode causes the phase difference $\phi _{p\theta }$ to change between the periodic pressure and dilatation waves. This forms a negative cycle-averaged pressure dilatation near the wall and creates the cooled region. Further, by using porous steel to modify the sound admittance of the model surface, it is possible to artificially obtain negative cycle-averaged pressure dilatation near the wall, and thus reduce the surface heat flux by approximately 28 %. These results indicate the possibility of precisely controlling the pressure-dilatation-induced aerodynamic heating through the modification of surface sound admittance.

In this paper, the generation of relativistic electron mirrors (REMs) and the reflection of an ultra-short laser off this mirrors are discussed, applying two-dimensional particle-in-cell (2D-PIC) simulations. REMs with ultra-high acceleration and expanding velocity can be produced from a solid nanofoil illuminated normally by an ultra-intense femtosecond laser pulse with a sharp rising edge. Chirped attosecond pulse can be produced through the reflection of a counter-propagating probe laser off the accelerating REM. In the electron moving frame, the plasma frequency of the REM keeps decreasing due to its rapidly expanding. The laser frequency, on the contrary, keeps increasing due to the acceleration of REM and the relativistic Doppler shift from the lab frame to the electron moving frame. Within an ultra-short time interval, the two frequencies will be equal in the electron moving frame, which leads the resonance between laser and REM. The reflected radiation near this interval and the corresponding spectra will be amplified due to the resonance. Through adjusting the arriving time of the probe laser, certain part of the reflected field could be selectively amplified or depressed, leading to the selectively adjusting of the corresponding spectra.

The dependence of fishbone cycle on energetic particle intensity has been investigated in EAST low-magnetic-shear plasmas. It is observed that the fishbone mode growth rate, saturation amplitude as well as fishbone cycle frequency clearly increase with increasing neutral beam injection (NBI) power. Moreover, enhanced electron density and temperature perturbations as well as energetic particle loss were observed with greater injected NBI power. Simulation results using M3D-K code show that as the NBI power increases, the resonant frequency and the energy of the resonant particles become higher, and the saturation amplitude of the mode also changes, due to the non-perturbative energetic particle contribution. The relationship between the calculated energetic particle pressure ratio and fishbone cycle frequency is obtained as ${f_{\textrm{FC}}} = 2.2{(1000{\beta _{\textrm{ep,calc}}} - 0.1)^{5.9 \pm 0.5}}$. Results consistent with the experimental observations have been achieved based on a predator–prey model.

Previous genetic studies on hair morphology focused on the overall morphology of the hair using data collected by self-report or researcher observation. Here, we present the first genome-wide association study (GWAS) of a micro-level quantitative measure of hair curvature. We compare these results to GWAS results obtained using a macro-level classification of observable hair curvature performed in the same sample of twins and siblings of European descent. Observational data were collected by trained observers, while quantitative data were acquired using an Optical Fibre Diameter Analyser (OFDA). The GWAS for both the observational and quantitative measures of hair curvature resulted in genome-wide significant signals at chromosome 1q21.3 close to the trichohyalin (TCHH) gene, previously shown to harbor variants associated with straight hair morphology in Europeans. All genetic variants reaching genome-wide significance for both GWAS (quantitative measure lead single-nucleotide polymorphism [SNP] rs12130862, p = 9.5 × 10–09; observational measure lead SNP rs11803731, p = 2.1 × 10–17) were in moderate to very high linkage disequilibrium (LD) with each other (minimum r2 = .45), indicating they represent the same genetic locus. Conditional analyses confirmed the presence of only one signal associated with each measure at this locus. Results from the quantitative measures reconfirmed the accuracy of observational measures.

We report on the generation of a mid-infrared (mid-IR) frequency comb with a maximum average output power of 250 mW and tunability in the 2.7–4.0 μm region. The approach is based on a single-stage difference frequency generation (DFG) starting from a compact Yb-doped fiber laser system. The repetition rate of the near-infrared (NIR) comb is locked at 75 MHz. The phase noise of the repetition rate in the offset-free mid-IR comb system is measured and analyzed. Except for the intrinsic of NIR comb, environmental noise at low frequency and quantum noise at high frequency from the amplifier chain and nonlinear spectral broadening are the main noise sources of broadening the linewidth of comb teeth, which limits the precision of mid-IR dual-comb spectroscopy.