Hostname: page-component-cb9f654ff-plnhv Total loading time: 0.001 Render date: 2025-08-28T20:25:13.206Z Has data issue: false hasContentIssue false
  • English
  • Français

SUPPORTING THE MODELLING IN MBSE BY APPLYING PRODUCT GENERATION ENGINEERING USING ELECTRONIC COMPACT ACTUATORS AS AN EXAMPLE

Part of: Systems Engineering and Design

Published online by Cambridge University Press:  11 June 2020

M. Wäschle ,
A. Martin ,
A. Radimersky ,
M. Behrendt  and
A. Albers
M. Wäschle*
Affiliation:
Karlsruhe Institute of Technology, Germany
A. Martin
Affiliation:
Karlsruhe Institute of Technology, Germany
A. Radimersky
Affiliation:
Robert Bosch GmbH, Germany
M. Behrendt
Affiliation:
Karlsruhe Institute of Technology, Germany
A. Albers
Affiliation:
Karlsruhe Institute of Technology, Germany
*
*moritz.waeschle@kit.edu

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

The development of a new motor can be a high effort. In this paper, Model-based Systems Engineering (MBSE) is applied to model the second generation of an electronic compact actuator (ECA). This paper focuses on the traceability between model elements from previous product generations. By integrating the approach of the PGE - Product Generation Engineering in MBSE, developers can store more relevant information in the model; they can accomplish automatic calculations of derived factors and build models more efficiently in further product developments.

Keywords

systems engineering (SE)model-based engineeringproduct generation engineering (PGE)traceability

Information

Type
Article
Information
Proceedings of the Design Society: DESIGN Conference , Volume 1 , May 2020 , pp. 2425 - 2434
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2020. Published by Cambridge University Press

References

Albers, A., Bursac, N. and Rapp, S. (2017), “PGE – Produktgenerationsentwicklung am Beispiel des Zweimassenschwungrads”, Forschung im Ingenieurwesen, Vol. 81 No. 1, pp. 13–31.CrossRefGoogle Scholar
Albers, A., Bursac, N. and Wintergerst, E. (2015), “Produktgenerationsentwicklung - Bedeutung und Herausforderungen aus einer entwicklungsmethodischen Perspektive”.Google Scholar
Albers, A. and Matthiesen, S. (2002), “Konstruktionsmethodisches Grundmodell zum Zusammenhang von Funktion und Gestalt technischer Systeme. Konstruktion” , In Konstruktion Zeitschrift für Produktentwicklung, 7-8/2002, pp. 55–60.Google Scholar
Albers, A. et al. (2019), Das Referenzsystem im Modell der PGE – Produktgenerationsentwicklung: Vorschlag einer generalisierten Beschreibung von Referenzprodukten und ihrer Wechselbeziehungen.Google Scholar
Albers, A., Walch, M., Bursac, N. and IPEK - Institut für Produktentwicklung am Karlsruher Institut für Technologie (KIT) (2016), “Entscheidungsunterstützung durch die Variationsanteile der Produktgeneration sentwicklung”, Konstruktion, No. 4.Google Scholar
Albers, A. and Wintergerst, E. (2014), “The Contact and Channel Approach (C&C²-A) – relating a system's physical structure to its functionality ”, In Chakrabarti, A. and Blessing, L. (Eds.), An Anthology of Theories and Models of Design: Philosophy, Approaches and Empirical Explorations, IWMT Bangalore 2013, Springer.Google Scholar
Ehrlenspiel, K. (2009), Integrierte Produktentwicklung – Denkabläufe, Methodeneinsatz, Zusammenarbeit, Carl Hanser, München.CrossRefGoogle Scholar
Fagen, M.D. (Ed.) (1978), A history of engineering and science in the Bell system: National service in war and peace; (1925 - 1975), 1. pr, Bell Telephone Laboratories, New York.Google Scholar
Hall, A.D. (1962), A methodology for systems engineering, 1. publ., repr, Van Nostrand, Princeton, N.J. [u.a.].Google Scholar
International Council on Systems Engineering (INCOSE) (Ed.) (2007), INCOSE Systems Engineering Vision 2020.Google Scholar
Matthiesen, S. et al. (2018), “Modellbildung mit dem C&C²-Ansatz in der Gestaltung – Techniken zur Analyse und Synthese”, KIT Scientific Working Papers, Vol. 58.Google Scholar
Müller, M. et al. (Eds.) (2017), Efficient application of MBSE using reference models: A pge case study.Google Scholar
Object Management Group (OMG), OMG Systems Modeling LanguageTM: Version 1.5 No. formal/2017-05-01, available at: https://www.omg.org/spec/SysML/1.5/ (accessed 6 November 2019).Google Scholar
Pahl, G. et al. (2007), Konstruktionslehre Grundlagen erfolgreicher Produktentwicklung. Methoden und Anwendung, Springer-Verlag.Google Scholar
Pohl, K. et al. (2012), Model-Based Engineering of Embedded Systems: The SPES 2020 Methodology, Springer, Berlin, Heidelberg.CrossRefGoogle Scholar
Robert Bosch GmbH (2019), “Aktuator für Anwendungen im Antriebsstrang (ECA). Skalierbarer Antrieb in drei Elektronikvarianten”, available at: https://www.bosch-mobility-solutions.de/de/produkte-und-services/pkw-und-leichte-nutzfahrzeuge/antriebssysteme/getriebetechnik/aktuator-f%C3%BCr-anwendungen-im-antriebsstrang-(eca)/ (accessed 11 November 2019).Google Scholar
Schlager, K.J. (1956), “Systems engineering-key to modern development”, IRE Transactions on Engineering Management, Vol. 3, No. 3, pp. 64–66.CrossRefGoogle Scholar
Stachowiak, H. (1973), Allgemeine Modelltheorie, Springer Verlag, Wien.CrossRefGoogle Scholar
Weilkiens, T. and Soley, R.M. (2014), Systems Engineering mit SysML/UML: Anforderungen, Analyse, Architektur, 3., überarb. und aktualisierte Aufl., dpunkt.verl., Heidelberg.Google Scholar
Wiedner, A. (2013), Feldstudie zur Identifikation der von Konstrukteuren praktizierten Handlungsmuster bei der Funktion-Gestalt-Synthese, Vol. 65, Karlsruhe.Google Scholar
Zingel, C. et al. and IAENG - International Association of Engineers (2012), “Experiences and Advancements from One Year of Explorative Application of an Integrated Model-Based Development Technique Using C&C²-A in SysML”, International Journal of Computer Science, Vol. 34-39 No. 2, pp. 165–181.Google Scholar